首页|期刊导航|铸造技术|升温速率对锆合金管材氢化物析出的影响

升温速率对锆合金管材氢化物析出的影响OA

Effect of Heating Rate on Hydride Precipitation in Zirconium Alloys

中文摘要英文摘要

锆合金因综合性能优异而被广泛用作轻水堆的燃料包壳材料.核反应堆运行期间,包壳不可避免地从高温冷却剂中吸氢.传统认知认为,在无外部载荷作用下,氢化物倾向于沿管材周向析出;仅当施加外部拉应力时才会发生再取向形成径向氢化物.然而,本研究表明,在无外部机械载荷条件下,过高的升温速率亦可诱发显著的氢化物再取向行为.实验结果显示,当升温速率提升至20 ℃/min时,管材外壁形成宏观可见的径向氢化物聚集区,呈现特征性的"太阳斑"状形貌.分析表明,快速升温在管壁厚度方向上建立了陡峭的温度梯度,致使外壁因受内壁约束而产生动态环向拉应力;该应力场不仅驱动固溶氢向高拉应力区发生"上坡扩散",更诱导氢化物在过饱和状态下垂直于拉应力方向择优析出.

Zirconium alloys are widely used as fuel cladding in light water reactors because of their optimal combination of mechanical strength,corrosion resistance,and low neutron absorption cross-section.During operation,cladding inevitably absorbs hydrogen from the high-temperature coolant.Conventionally,hydride precipitates exhibit a circumferential orientation under stress-free conditions,and reorientation into a radial morphology is traditionally attributed to sustained tensile hoop stress.Here,it is demonstrated that pronounced hydride reorientation can occur under stress-free conditions,triggered solely by rapid thermal transients.The experimental results reveal that at a heating rate of 20℃/min,a localized,radially oriented hydride aggregation zone-resembling a"sunspot"—emerges on the outer cladding surface.Mechanistic analysis indicates that rapid heating establishes a steep through-thickness temperature gradient,which,under deformation compatibility,forces the expanding outer wall to be constrained by the inner wall and consequently drives a dynamic circumferential tensile stress gradient.This transient gradient drives solute hydrogen toward regions of higher tensile stress via uphill diffusion and triggers rapid precipitation in the supersaturated matrix,preferentially aligning hydrides perpendicular to the principal tensile axis.

程绍杨;严孟元;惠泊宁;陈彪;李金山

西安西部新锆科技股份有限公司,陕西西安 710299西安西部新锆科技股份有限公司,陕西西安 710299西安西部新锆科技股份有限公司,陕西西安 710299||西北工业大学凝固技术全国重点实验室,陕西西安 710072西北工业大学凝固技术全国重点实验室,陕西西安 710072西北工业大学凝固技术全国重点实验室,陕西西安 710072

矿业与冶金

锆合金氢化物升温速率再取向

zirconium alloyshydrideheating ratereorientation

《铸造技术》 2026 (8)

888-893,6

国家自然科学基金(U25B20112)

10.16410/j.issn1000-8365.2026.6108

评论