首页|期刊导航|铸造技术|航空航天用铝合金增材制造研究进展

航空航天用铝合金增材制造研究进展OA

Research Progress in the Additive Manufacturing of Aluminium Alloys for Aerospace Applications

中文摘要英文摘要

随着航空航天装备向轻量化、整体化和高可靠性方向发展,传统铝合金制造工艺在复杂结构成形、材料利用率和制造周期等方面逐渐难以满足先进飞行器的需求.增材制造技术凭借设计自由度高、近净成形和结构一体化制造等优势,为航空航天铝合金构件制造提供了新的技术路径.本文围绕航空航天用铝合金增材制造研究进展,系统综述了激光粉末床熔融、电弧增材制造和定向能量沉积等主要增材制造工艺的特点,重点分析了 Al-Si、Al-Cu、Al-Mg、Al-Mg-Si及Al-Zn-Mg-Cu等典型铝合金的成形行为、组织演化、缺陷控制和性能调控研究进展.同时,结合轻量化支架、通信卫星波导、空间光学组件和火箭贮箱等典型工程应用,归纳了增材制造铝合金在航空航天构件中的应用现状.最后,总结了当前航空航天铝合金增材制造面临的热裂纹、孔隙、残余应力、组织各向异性及服役可靠性等关键问题,并展望了增材制造专用铝合金设计、智能过程控制、后处理协同优化和标准化认证等未来发展方向.

With the development of aerospace equipment for lightweight,integrated,and highly reliable structures,conventional manufacturing processes for aluminium alloys are becoming increasingly unable to meet the requirements of advanced aircraft and spacecraft in terms of complex-structure fabrication,material utilization,and manufacturing cycles.Owing to its high design freedom,near-net-shaped forming capability,and advantages in integrated structural manufacturing,additive manufacturing provides a new technical route for the fabrication of aerospace aluminium alloy components.Focusing on recent progress in additive manufacturing of aluminium alloys for aerospace applications,this paper systematically reviews the characteristics of major additive manufacturing processes,including laser powder bed fusion,wire arc additive manufacturing,and directed energy deposition.The forming behavior,microstructural evolution,defect control,and property regulation of typical aluminium alloy systems,including Al-Si,Al-Cu,Al-Mg,Al-Mg-Si,and Al-Zn-Mg-Cu alloys,are analysed in detail.In addition,representative engineering applications,such as lightweight brackets,communication satellite waveguides,space optical components,and rocket propellant tanks,are summarized to illustrate the current application status of additively manufactured aluminium alloys in aerospace components.Finally,key challenges in aerospace aluminium alloy additive manufacturing,including hot cracking,porosity,residual stress,microstructural anisotropy,and service reliability,are discussed,and future development directions are proposed,including the design of aluminium alloys specifically for additive manufacturing,intelligent process control,synergistic optimization of postprocessing,and standardization and certification.

周泉;仇生生;姜文煌;何先迪;张思远;张博伟

北京空间机电研究所,北京 100094泸州翰飞航天科技发展有限责任公司,四川泸州 646000泸州翰飞航天科技发展有限责任公司,四川泸州 646000泸州翰飞航天科技发展有限责任公司,四川泸州 646000北京空间机电研究所,北京 100094北京空间机电研究所,北京 100094

矿业与冶金

航空航天铝合金增材制造激光粉末床熔融电弧增材制造定向能量沉积工程应用

aerospace aluminium alloysadditive manufacturinglaser powder bed fusionwire arc additive manufacturingdirected energy depositionengineering applications

《铸造技术》 2026 (8)

827-842,16

10.16410/j.issn1000-8365.2026.6131

评论