马铃薯堆垛机增高减损设计与试验OA
Design and experiment on height increase and damage reduction of a potato stacker
马铃薯堆垛是入库储藏的关键环节,国内堆垛作业机械化、自动化水平偏低,现有装备在马铃薯垛堆较高的工况下普遍存在马铃薯跌落过程中受冲击大、伤薯率高等问题,且缺乏动态高度调控手段和低损参数优化研究.为此,开展马铃薯堆垛机增高减损优化设计与试验.设备配备可升降出料结构,通过实时调节出料口与薯堆的垂直间距,缩短马铃薯自由下落高度、降低碰撞冲击能量,在保障高位堆垛作业效能的同时控制伤薯率.通过理论分析筛选影响作业效果的关键结构参数,对输送带、托辊等部件进行优化设计,并运用EDEM离散元仿真进行结构校核.选取输送速度、出料口末端与薯堆竖直间距、上料量为试验因素,以堆垛效率、伤薯率为评价指标,开展二次旋转正交组合试验.借助Design-Expert软件建立二阶响应面模型,采用期望函数法进行多目标优化,结合现场生产需求设定堆垛效率权重0.6、伤薯率权重0.4.最优作业参数组合为:输送速度0.56 m/s、出料口与薯堆竖直间距184.46 mm、上料量26.96 t/h,对应堆垛效率24.80 t/h、伤薯率0.61%.验证试验结果显示,堆垛效率差值为0.29 t/h,伤薯率差值为0.04%,验证试验结果与优化预测值较为接近,表明优化参数组合具有一定适用性.研究结果可为马铃薯仓储堆垛装备的工况调控与低损作业提供技术参考.
Potato stacking constitutes a crucial procedure for warehouse storage.At present,the mechanization and automation levels of domestic potato stacking operations are relatively low.Conventional stacking equipment suffers severe drop impact and high tuber bruising rate under the working condition of high potato piles,and relevant researches on dynamic height adjustment and low-damage parameter optimization are insufficient.Therefore,the optimal design and experiment of a height-adjustable potato stacker for damage reduction were carried out in this study.The stacker is equipped with a liftable discharging mechanism that modulates the vertical distance between the discharge outlet and the potato pile in real-time,thereby reducing the free-fall distance and impact energy,which controls injury rates while maintaining high stacking efficiency.Key structural parameters affecting operation performance were screened via theoretical analysis,and core components of conveyor belts and supporting rollers were optimally designed.The EDEM discrete element simulation technology was adopted to conduct structural verification.Conveying speed,vertical distance between the end of discharge outlet and potato pile,and feeding rate were selected as test factors,while stacking efficiency and tuber bruising rate were taken as evaluation indices,and a quadratic orthogonal rotation combination test was implemented.A second-order response surface model was established by Design-Expert software,and the desirability function method was used for multi-objective optimization.Combined with actual on-site production demands,the weight of stacking efficiency was set to 0.6 and the weight of tuber bruising rate was set to 0.4.The optimal parameter combination was as follows:conveying speed of 0.56 m/s,vertical distance of 184.46 mm between discharge outlet and potato pile,and feeding rate of 26.96 t/h,corresponding to a stacking efficiency of 24.80 t/h and a tuber bruising rate of 0.61%.The verification test results showed that the error of stacking efficiency was 0.29 t/h and the error of tuber bruising rate was 0.04%.The measured values wereclose to the optimized predicted values,which proved that the optimized parameter combination had favorable applicability.The research results can provide technical references for working condition regulation and low-damage operation of potato warehouse stacking equipment.
吕品岩;王景立;竹筱歆;李忠远
吉林农业大学工程技术学院,吉林 长春,130118吉林农业大学工程技术学院,吉林 长春,130118东北农业大学工程学院,黑龙江 哈尔滨,150030东北农业大学工程学院,黑龙江 哈尔滨,150030
农业科技
马铃薯堆垛机增高减损正交试验参数优化输送特性跌落损伤
potato stackervariable height loss reductionorthogonal testparameter optimizatioconveying characteristicsdropping impact damage
《智能化农业装备学报(中英文)》 2026 (3)
98-108,11
国家重点研发计划课题(2023YFD2000901)国家马铃薯产业技术体系岗位科学家专项(CARS-09-P23) National Key Research and Development Program of China(2023YFD2000901)Scientists-at-Post Special Project of National Potato Industry Technology System(CARS-09-P23)
评论