面向对辊式采收的朝天椒植株离散元参数标定与试验验证OA
Calibration and experimental verification of discrete element parameters of clustered pepper plants for double-roller harvesting
为提高离散元法在辣椒智能化农业装备以及果实损伤机理研究中的准确性和可靠性,本研究以"纂椒1号"朝天椒为对象,基于EDEM中Hertz-Mindlin with Bonding V2模型构建了包括果实—果柄、果柄—侧枝结构的收获期朝天椒植株离散元模型,通过直接测量方法对果实、果柄和侧枝等部位本征参数、接触参数进行了测定,并通过响应面虚拟标定和逐步逼近法对果实—果柄、果柄—侧枝粘结参数进行标定,得到果实—果柄法向刚度为 6×109 N/m3、法向极限应力为5.446×106 Pa、粘结半径为0.668 mm,果柄—侧枝法向刚度为7.520×109 N/m3、法向极限应力为5.020×106 Pa、粘结半径为0.906 mm.最后搭建了对辊式朝天椒收获机,并通过田间试验和仿真试验对所构建的离散元模型进行验证,设定机具行走速度 0.2 m/s、摘脱辊转速 10 rad/s,仿真与田间试验可得,朝天椒植株采收摘净率和含果柄率相对误差分别为2.64%、7.69%.结果表明,所建立的朝天椒植株离散元仿真模型能较好反映朝天椒采收过程中果实脱落特性,研究成果可为辣椒机械采收过程中关键部位力学特性研究提供理论支撑,也为收获装备的结构优化与朝天椒机械化采收的智能化仿真提供基础模型支撑.
To improve the accuracy and reliability of the Discrete Element Method(DEM)in the research on intelligent agricultural equipment for pepper harvesting and fruit damage mechanism,this paper takes"Zuanjiao No.1"clustered pepper as the research object.Based on the Hertz-Mindlin with Bonding V2 model in EDEM,a discrete element model of clustered pepper plants at the harvesting stage is established,which includes the pepper-carpopodium and carpopodium-branch structures.The intrinsic parameters and contact parameters of peppers,carpopodium,branches and other components were measured by direct measurement.The bonding parameters of pepper-carpopodium and carpopodium-branch were calibrated by response surface virtual calibration and stepwise approximation method.The calibrated results showed that the normal stiffness,normal ultimate stress and bonding radius of pepper-carpopodium were 6×10⁹ N/m³,5.446×10⁶ Pa and 0.668 mm,respectively,while those of carpopodium-branch were 7.520×10⁹ N/m³,5.020×10⁶ Pa and 0.906 mm,respectively.Finally,a double-roller clustered pepper harvester was built,and the established discrete element model was verified through field tests and simulation tests.The machine travel speed was set at 0.2 m/s and the stripping roller speed at 10 rad/s.The relative errors of the cleaning rate and carpopodium-containing rate of clustered pepper plants between simulation and field tests were 2.64%and 7.69%,respectively.The results show that the established discrete element simulation model of clustered pepper plants can well capture the fruit shedding characteristics during clustered pepper harvesting.The research results can provide theoretical support for the study of mechanical properties of key components during mechanical pepper harvesting,and also provide a fundamental model support for the structural optimization of harvesting equipment and the intelligent simulation of pepper mechanized harvesting.
刘超;刘凡一;谢守勇;蒲应俊;陈行政;海明
西南大学工程技术学院,重庆市,400715||西南农业智能装备创新中心,重庆市,400715西南大学工程技术学院,重庆市,400715||西南农业智能装备创新中心,重庆市,400715||丘陵山区智能农机装备重庆市重点实验室,重庆市,400715西南大学工程技术学院,重庆市,400715||西南农业智能装备创新中心,重庆市,400715||丘陵山区智能农机装备重庆市重点实验室,重庆市,400715西南大学工程技术学院,重庆市,400715||西南农业智能装备创新中心,重庆市,400715||丘陵山区智能农机装备重庆市重点实验室,重庆市,400715西南大学工程技术学院,重庆市,400715||西南农业智能装备创新中心,重庆市,400715||丘陵山区智能农机装备重庆市重点实验室,重庆市,400715西南大学工程技术学院,重庆市,400715||西南农业智能装备创新中心,重庆市,400715
农业科技
朝天椒参数标定离散元对辊式收获机响应面
clustered pepperparameter calibrationdiscrete element methoddouble-rollerharvesterresponse surface
《智能化农业装备学报(中英文)》 2026 (3)
85-97,13
国家自然科学基金项目(32201668)重庆市技术创新与应用发展专项重点项目(cstc2021jscx-gksbX0019) National Natural Science Foundation of China(32201668)Chongqing Key Program of Technology Inno-vation and Application Development(cstc2021jscx-gksbX0019)
评论