2BP-2000型水稻育秧线自动码垛装置优化与控制系统设计OA
Optimization and control system design of an automatic palletizing device for the 2BP-2000 rice seedling production line
针对水稻工厂化育秧生产中人工码垛效率低、劳动强度大及作业稳定性较差的问题,设计了一种适配2BP-2000型水稻育秧流水线的自动码垛装置及其PLC控制系统.该装置通过双气缸驱动的夹持机构实现层叠秧盘的稳定夹取,结合限位机构与秧盘层检测机构确保定位精度与作业安全.系统采用伺服电机驱动的竖直/水平运动机构完成S形码垛路径规划,并通过PLC编程实现对夹持、升降、水平转运等多机构的协同控制,提出层数自适应升降策略,有效缩短空行程时间,提高整体码垛节拍.与传统直线路径相比,S形路径能减少启停次数,降低机械惯性冲击,使运行更加平稳.为实现控制精度与作业效率的平衡,研究利用单因素试验与响应面法对主要参数进行优化.以生产率(1 600~2 400盘/h)、夹持时间(0.7~1.5 s)、码垛速度(0.26~0.34 m/s)为变量,以码垛成功率(N1)和错位偏差(N2)为指标进行优化.结果表明:最优参数组合为生产率 2 000盘/h、夹持时间 1.1 s、码垛速度 0.29 m/s时,码垛成功率达 98.17%,错位偏差为 3.17 mm².该装置系统运行稳定,重复定位精度高,能够适应连续作业需求,显著提升水稻育秧线的自动化水平.研究结果表明该装置对2BP-2000型水稻育秧线有较好的适应性.
To address the low efficiency,intensive labor input,and poor operational stability of manual palletizing in industrialized rice seedling production,an automatic palletizing device equipped with a PLC-based control system was developed for the 2BP-2000 rice seedling production line.The device achieves stable gripping of stacked seedling trays through a dual-cylinder clamping mechanism,and positioning accuracy and operational safety are guaranteed by integrating a limit mechanism and a seedling tray layer detection mechanism.A servo-motor-driven vertical and horizontal motion system was adopted to execute an S-shaped palletizing path,and coordinated control of clamping,lifting,and horizontal transfer was realized through PLC programming.In addition,an adaptive lifting strategy based on the number of tray layers was proposed to reduce idle travel and improve the overall palletizing rhythm.Compared with the traditional straight-line path,the S-shaped path reduces start-stop frequency,mitigates the effects of mechanical inertia,and improves operational stability.To balance control accuracy and operating efficiency,the key parameters were optimized by single-factor experiments and response surface methodology.Productivity(1 600-2 400 trays/h),clamping time(0.7-1.5 s),and palletizing speed(0.26-0.34 m/s)were set as variables,and palletizing success rate(N1)and misalignment deviation(N2)were defined as optimization indicators.The results showed that under the optimal parameter combination of 2 000 trays/h productivity,1.1 s clamping time,and 0.29 m/s palletizing speed,the palletizing success rate reached 98.17%,and the misalignment deviation was 3.17 mm².The developed device exhibited stable operation with high repeat positioning accuracy,meeting the requirements of continuous operation and significantly improving the automation level of the rice seedling production line.The results further indicate that the device presents favorable adaptability to the 2BP-2000 rice seedling production line.
夏家成;谢方平;刘大为;李家杰;刘洋;龚明
湖南农业大学机电工程学院,湖南 长沙,410128湖南农业大学机电工程学院,湖南 长沙,410128||智能农机装备湖南省重点实验室,湖南 长沙,410128||农业农村部南方智能育秧(苗)重点实验室,湖南 益阳,413055湖南农业大学机电工程学院,湖南 长沙,410128||智能农机装备湖南省重点实验室,湖南 长沙,410128||农业农村部南方智能育秧(苗)重点实验室,湖南 益阳,413055湖南农业大学机电工程学院,湖南 长沙,410128湖南农业大学机电工程学院,湖南 长沙,410128农业农村部南方智能育秧(苗)重点实验室,湖南 益阳,413055
农业科技
水稻秧盘自动码垛PLC控制路径优化响应面法夹持机构
rice seedling trayautomatic palletizingPLC controlpath optimizationresponse surface methodclamping mechanism
《智能化农业装备学报(中英文)》 2026 (3)
73-84,12
湖南省重点研发计划项目(2024JK2032)国家重点研发计划项目(2022YFD2300103) Hunan Provincial Key Research and Development Program Project(2024JK2032)National Key Research and Development Program of China(2022YFD2300103)
评论