首页|期刊导航|应用数学和力学|间距对含中间层爆炸焊接影响的数值模拟

间距对含中间层爆炸焊接影响的数值模拟OA

Numerical Simulation of Stand-Off Distance Effects on Explosive Welding With an Intermediate Layer

中文摘要英文摘要

研究了间距对含中间层爆炸焊接的影响,使用 ANSYS/LS-DYNA 有限元软件,分别采用任意 Lagrange-Euler算法(ALE 法)与光滑粒子流体动力学-有限元耦合算法(SPH-FEM 法)对商业纯钛(TP270C)和双相不锈钢(SUS821L1)以及中间层(SUS821L1)进行爆炸焊接过程的三维数值模拟.系统性分析了两种算法下复板在各间距(5 mm,10 mm,15 mm/2 mm)作用下的竖向位移、碰撞速度、碰撞压强和中间层塑性变形的规律.模拟结果表明:复板的竖向位移均大于基复板的间距,碰撞速度均落在爆炸焊接窗口以内,复板的碰撞速度、碰撞压强、中间层的塑性变形以及中间层所划分的复板动能和碰撞压强均随着间距的增加而增大.同时,三种间距在中间层的作用下均实现焊接成功,当间距为15 mm 时爆炸焊接质量最高,与试验吻合.此外,本研究还基于药厚40 mm 间距30 mm/2 mm与药厚38 mm 间距55 mm/2 mm 两个对照组进行了数值模拟.模拟结果证明当复板处于加速阶段时,可采用减少炸药药厚与增加复板与中间层间距的方法来达到与原试验相同的焊接效果,这样既保证了焊接质量,又降低了爆炸焊接试验的成本,为爆炸焊接试验提供理论指导.

the stand-off distance effects on explosive welding with an interlayer were investigated,with the AN-SYS/LS-DYNA finite element software.The 3D numerical simulations of the explosive welding process were conducted for the commercially pure titanium(TP270C),the duplex stainless steel(SUS821L1),and the inter-layer(SUS821L1),with 2 distinct algorithms:the arbitrary Lagrangian-Eulerian(ALE)method and the smoothed particle hydrodynamics-finite element method(SPH-FEM)coupling algorithm.The behaviors of the flyer plate under varying stand-off distances(5 mm,10 mm,15 mm/2 mm),including the vertical displace-ment,the collision velocity,the collision pressure,and the plastic deformation of the interlayer,were system-atically analyzed across both algorithms.The simulation results show that,the vertical displacement of the flyer plate exceeds the stand-off distance between the base plate and the flyer plate,and the collision velocity falls within the explosive welding window.The collision velocity,the collision pressure of the flyer plate,the plastic deformation of the interlayer,the partitioned kinetic energy of the flyer plate and the collision pressure by the interlayer,all increase with the stand-off distance.All 3 stand-off distances achieve successful welding under the action of the interlayer.The highest explosive welding quality occurs at a stand-off distance of 15 mm,which matches the experimental results.Furthermore,numerical simulations based on 2 control groups'explo-sive thicknesses:40 mm with stand-off distances of 30 mm/2 mm,and 38 mm with stand-off distances of 55 mm/2 mm,were performed.The results demonstrate that,reducing the explosive thickness and increasing the stand-off distance between the interlayer and the flyer plate during the acceleration phase achieve welding effects identical to those of the original experiments.This work ensures welding quality,reduces the cost of ex-plosive welding experiments,and provides theoretical guidance for engineering applications.

缪广红;倪亚东;魏正梅;吴伟达;田广阔

安徽理工大学 力学与光电物理学院,安徽 淮南 232001安徽理工大学 土木建筑学院,安徽 淮南 232001安徽理工大学 力学与光电物理学院,安徽 淮南 232001安徽理工大学 土木建筑学院,安徽 淮南 232001安徽理工大学 土木建筑学院,安徽 淮南 232001

数理科学

间距爆炸焊接中间层ALE法SPH-FEM法

stand-off distanceexplosive weldingintermediate layerALE algorithmSPH-FEM algorithm

《应用数学和力学》 2026 (9)

1117-1131,15

国家自然科学基金(11902003)

10.21656/1000-0887.460147

评论