首页|期刊导航|云南冶金|不规则矿体矿化域资源量估算方法研究

不规则矿体矿化域资源量估算方法研究OA

Study on Resource Estimation method of Mineralized Zones in irregular Ore Bodies

中文摘要英文摘要

普朗铜矿矿体为空间上呈筒状、边界形态极不规则的斑岩型铜矿,矿体资源量估算方法为平行断面法,体积计算方法为工业矿、低品位矿面积分别累加后与相邻剖面进行连算,估算结果较实际偏大.为对比不同方法对不规则矿体资源量估算的影响,基于DIMINE三维矿业软件建立了全矿化域、半矿化域、夹石三维模型,采用地质统计学方法进行资源量估算,并与平行断面法进行了对比,同时对比了夹石剔除矿化域与全矿化域资源量估算结果.研究表明,全矿化域、半矿化域、平行断面法估算结果矿石量差值范围为0.73%~1.48%,金属品位差值范围为2.13%~6.38%,金属量差值范围为2.38%~3.92%;夹石剔除后较全矿化域矿石量减少2.16%,品位提高2.27%,金属量减少1.54%.对于不规则厚大斑岩型矿体,采用全矿化域地质统计学方法进行资源量估算具有可行性,排除夹石对估算的影响后结果更为合理.

The orebody of the Pulang Copper Mine is a porphyry copper mine spatially shaped like a cylinder with highly irregular boundary geometry.The parallel section method is adopted for orebody resource estimation.For volume calculation,the areas of industrial ore and low-grade ore are summed separately before correlative calculation between adjacent sections,which leads to overestimated results compared with actual reserves.To compare the influences of different estimation methods on resource calculation of irregular ore bodies,three-dimensional models of the entire mineralized domain,partial mineralized zone and interlayer waste rock were established based on the DIMINE 3D mining software.The geostatistical method was applied for resource estimation,and the results were compared with those obtained by the parallel section method.Meanwhile,the resource estimation results of mineralized zones with waste rock excluded and full mineralized zones were also compared.The study shows that the difference ranges of ore tonnage estimated by the full mineralized zone method,partially mineralized domain method and parallel section method are 0.73%~1.48%;the difference ranges of metal grade are 2.13%~6.38%;and the difference ranges of metal quantity are 2.38%~3.92%.After removing interlayer waste rock,the ore tonnage decreases by 2.16%,the metal grade rises by 2.27%,and the metal quantity decreases by 1.54%compared with the full mineralized zone model.For thick and large irregular porphyry ore bodies,it is feasible to adopt the geostatistical method based on the full mineralized zone for resource estimation,and the estimation results become ore reasonable after eliminating the interference of interlayer waste rock.

羊劲松;张达兵;胡明川;杨家宏;王晟;沙文忠

云南迪庆有色金属有限责任公司,云南香格里拉 674400中国铜业矿山研究院,云南 昆明 650031云南迪庆有色金属有限责任公司,云南香格里拉 674400云南迪庆有色金属有限责任公司,云南香格里拉 674400云南迪庆有色金属有限责任公司,云南香格里拉 674400云南迪庆有色金属有限责任公司,云南香格里拉 674400

天文与地球科学

普朗铜矿资源量估算地质统计学克里格法全矿化域半矿化域平行断面法

Pulang Copper Despsitresource estimationgeostatisticsKriging Methodentire mineralized domainpartially mineralized domainparallel section method

《云南冶金》 2026 (4)

1-8,23,9

云南省重大科技专项计划(202402AB080010)

评论