载人离心机下肢蹬力测量系统的设计OA
Design of lower-limb pedal force measurement system for manned centrifuges
目的:设计载人离心机下肢蹬力测量系统,以实时监测飞行员下肢蹬力情况.方法:载人离心机下肢蹬力测量系统由飞行员下肢蹬力测量子系统与下肢蹬力等效校准子系统组成.飞行员下肢蹬力测量子系统主要由下肢蹬力压力传感器、前端模拟信号采集盒、多通路数字信号采集装置和上位机信号转换模块组成.其中,下肢蹬力压力传感器以RunesKee BF350-3EB压力应变片为核心测量部件并输出模拟电压信号;前端模拟信号采集盒选用欧路达TDA-02A,负责接收、处理模拟电压信号;多通路数字信号采集装置选用阿尔泰DAM-3054P进行模拟电压信号和数字电压信号的转换;上位机信号转换模块将数字电压信号换算为下肢蹬力值.下肢蹬力等效校准子系统由下肢蹬力等效校准装置和上位机等效校准软件组成.其中,下肢蹬力等效校准装置由压力调节螺杆、承映HZC-01称重型压力传感器、蹬力校准采集盒组成,上位机等效校准软件基于Visual Studio 2019开发.结果:该系统可以准确测得飞行员在不同加速度条件下进行抗荷收紧动作时下肢蹬力的趋势变化,且在20~1 800 N范围内,下肢蹬力测试的最大误差为2.6%.结论:该系统能够准确、稳定地监测飞行员在载人离心机训练中的下肢蹬力,可为飞行员的抗载荷能力训练研究提供有效的数据支撑.
Objective To develop a lower-limb pedal force measurement system for manned centrifuges so as to monitor the pilot's lower limb pedal force in real time.Methods The lower-limb pedal force measurement system was composed of two subsystems for pilot's lower limb pedal force measurement and lower limb pedal force equivalent calibration.The pilot's lower limb pedal force measurement subsystem consisted of a pressure sensor for lower limb pedal force,a front-end analog signal acquisition box,a multi-channel digital signal acquisition device and a host computer signal conversion module;the pressure sensor for lower limb pedal force used a RunesKee BF350-3EB strain gauge as the core measuring component and output analog voltage signals;the front-end analog signal acquisition box received and processed analog voltage signals with a TDA-02A;the multi-channel digital signal acquisition device realized the conversion of analog and digital voltage signals by using an ART DAM-3054P;the host computer signal conversion module converted digital voltage signals into lower limb pedal force values.The lower limb pedal force equivalent calibration subsystem comprised an equivalent calibration device and host computer equivalent calibration software;the equivalent calibration device was made up of a pressure adjusting screw,a Chengying HZC-01 weighting pressure sensor and a pedal force calibration acquisition box,and the equivalent calibration software was developed based on Visual Studio 2019.Results The system designed showed accurately the trend change of the lower limb pedal force when the pilot performed anti-G straining maneuvers under different acceleration con-ditions,and the maximum error of the lower limb pedal force test was 2.6%within the range of 20 to 1 800 N.Conclusion The system designed monitors accurately and stably the lower limb pedal force of pilots during manned centrifuge training,which provides effective data support for pilots'load resistance training research.[Chinese Medical Equipment Journal,2026,47(9):26-31]
郑媛憬;杨明浩;王海霞;李宝辉;王轶;张宏遒;郭中正;蒋科
空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142空军军医大学空军特色医学中心,北京 100142
医药卫生
下肢蹬力载人离心机抗载荷能力抗荷收紧动作载人离心机训练
lower limb pedal forcemanned centrifugeload resistance capabilityanti-G straining maneuvermanned centrifuge training
《医疗卫生装备》 2026 (9)
26-31,6
评论