单向纤维增强复合材料拉伸强度预测有限元建模OA
Finite Element Modeling for Tensile Strength Prediction of Unidirectional Fiber Reinforced Composites
为确保复合材料结构在复杂服役环境下的安全性与可靠性,对单向碳纤维增强复合材料(Unidirectional Carbon Fiber Reinforced Composite,UD CFRP)的极限强度开展了系统研究.重点关注UD CFRP中纤维强度的分散特性及其细观结构的非均匀性,建立了综合考虑纤维强度随机分布与细观非均匀特征的UD CFRP极限强度预测模型,并采用有限元仿真方法进行数值计算.通过将模型预测结果与试验测试数据进行系统比较,验证了该模型在预测UD CFRP单轴极限拉伸强度方面具有较高的准确性.基于此,进一步提出了纤维强度分布的优化策略.试验结果表明,通过剔除部分低强度纤维,不仅能显著提高复合材料的整体强度,还可有效降低其强度离散性,变异系数由原来的1.42%下降至0.31%,从而为复合材料可靠性提升与结构设计优化提供了理论依据.
In order to ensure the safety and reliability of composite structures in complex service environments,the ultimate strength of unidirectional carbon fiber reinforced composites(UD CFRP)was discussed in this paper.The research focuses on the dispersion of fiber strength in UD CFRP and the non-uniformity of its meso-structure.By constructing a set of UD CFRP ultimate strength prediction models that comprehensively consider the randomness and non-uniformity of fiber strength,the finite element simulation technology is used for calculation and analysis.The prediction results of the model are strictly compared with the experimental data,which verifies the high accuracy of the model in predicting the uniaxial ultimate tensile strength of UD CFRP.On this basis,this paper further proposes a strategy to optimize the fiber strength distribution.Practice has proved that by removing the proportion of fibers with lower strength,it can not only effectively improve the overall strength of the composite material,but also significantly reduce the dispersion of strength.The coefficient of variation is reduced from the original 1.42%to 0.31%,which provides a scientific basis for improving the reliability and design optimization of the composite material.
程远琦;张书锋;朱付磊
国防科技大学智能科学学院装备综合保障技术重点实验室,长沙 410073国防科技大学智能科学学院装备综合保障技术重点实验室,长沙 410073国防科技大学智能科学学院装备综合保障技术重点实验室,长沙 410073
通用工业技术
有限元单向碳纤维增强复合材料强度预测
Finite elementUnidirectional carbon fiber reinforced composite(UD CFRP)Strength prediction
《宇航材料工艺》 2026 (4)
88-92,5
评论