基于流固耦合的U形渡槽横向地震响应简化计算方法OA
Simplified Calculation Method for Transverse Seismic Response of U-shaped Aqueduct Based on Fluid-Structure Interaction
为解决传统流固耦合时程分析方法在 U 形渡槽横向抗震设计中存在的复杂性高、计算效率低的问题,提出一种基于势流理论与反应谱法的简化计算方法.该方法首先将地震作用下槽内水体的动力效应分解为脉冲压力与动水压力(晃动压力)两部分,并分别等效为作用于槽体的附加质量;进而推导了 U 形断面动水压力的解析表达式,结合抗震规范中的设计反应谱,利用平方根平方和(SRSS)法进行振型组合,建立了墩底剪力等关键地震响应的显式计算公式,并以粟家庙120 m 跨连续刚构渡槽为例进行了验算,并采用 ANSYS 软件建立了精细的二维流固耦合有限元模型进行非线性时程分析对比验证.结果表明:所提简化计算方法能有效模拟流固耦合效应,其墩底剪力计算结果与精细有限元模拟结果吻合良好,峰值相对误差约为8.2%;在计算效率方面,该方法避免了复杂的建模与耗时计算,能在数分钟内完成关键响应估算,显著提升了分析速度.该方法可为渡槽结构的初步抗震设计、快速安全评估及体型参数优化提供了高效、可靠的理论工具.
Aiming at the high complexity and low computational efficiency of the traditional fluid-structure interaction time-history anal-ysis method adopted in the transverse seismic design of U-shaped aqueducts,a simplified calculation method based on potential flow theory and response spectrum method is proposed.In this method,the dynamic effect of water inside the aqueduct under seismic excita-tion is decomposed into impulsive pressure and hydrodynamic sloshing pressure,which are equivalently converted into additional masses acting on the aqueduct structure.Furthermore,the analytical expression of hydrodynamic pressure for U-shaped cross-section is de-rived.Combined with the design response spectrum specified in seismic codes,the square root of the sum of squares(SRSS)method is used for mode superposition,and explicit formulas for key seismic responses such as pier base shear force are established.The pro-posed method is verified taking the 120 m-span continuous rigid-frame aqueduct at Sujiamiao as an engineering case.A refined two-dimensional fluid-structure interaction finite element model is built in ANSYS to carry out nonlinear time-history analysis for compara-tive verification.The results show that the proposed simplified method can effectively simulate fluid-structure interaction effects.The calculated pier base shear force agrees well with refined finite element simulation results,with a relative peak error of approximately 8.2%.In terms of computational efficiency,the method avoids complicated modeling and time-consuming computation;key response estimation can be completed within several minutes,greatly improving analysis speed.This method can serve as an efficient and relia-ble theoretical tool for preliminary seismic design,rapid safety evaluation and shape parameter optimization of aqueduct structures.
刘毅斌;任苇;刘昊男;杨徐千
中国电建集团西北勘测设计研究院有限公司,西安 710065中国电建集团西北勘测设计研究院有限公司,西安 710065中国电建集团西北勘测设计研究院有限公司,西安 710065中国电建集团西北勘测设计研究院有限公司,西安 710065
建筑与水利
渡槽流固耦合横向地震响应简化计算动水压力
aqueductfluid-structure interactiontransverse seismic responsesimplified calculationhydrodynamic pressure
《西北水电》 2026 (4)
65-70,6
陕西省自然科学基础研究计划项目(2022JQ-467)中国电建集团西北勘测设计研究院有限公司科研项目(2023100010)
评论