首页|期刊导航|天然气与石油|大型储罐筒体失稳双向应力校核方法的分析与比较

大型储罐筒体失稳双向应力校核方法的分析与比较OA

Analysis and comparison of biaxial stress verification methods for instability of large storage tank cylinders

中文摘要英文摘要

大型储罐具有大直径及薄壁厚,加之罐顶的大载荷以及工作情况下可能产生的负压、风压、雪压等载荷,储罐沿经向及纬向方向都具有较大的拉伸和压缩应力.在双向应力作用下对储罐强度及稳定性进行校核尤为重要.分析比较了美国标准 API 620-2025 Design and construction of large,welded,low-pressure storage tanks(以下简称 API 620-2025)、俄罗斯标准 SP 495.1325800.2020 Isothermal tanks for storage of liquefied gases design rules(以下简称 SP 495.1325800.2020)中关于大型储罐双向应力的设计方法,分析研究了大型储罐筒体经向受压的稳定性校核算例,提出了根据 API 620-2025 对储罐筒体进行经向失稳设计时,可采用API 620-2025 附录F 筒体经向受压、纬向既不受压也不受拉的特例情况对筒体经向失稳进行简化计算.将简化计算得出的校核结论与 SP 495.1325800.2020 中筒体失稳校核方法的校核结论、Ansys Workbentch 数值模拟分析结果进行对比,验证了简化计算校核结论的正确性.研究结果表明:在大型储罐双向应力的设计上,可采用 API 620-2025 附录 F 中筒体经向受压、纬向既不受压也不受拉的特例情况对筒体经向失稳进行简化计算,校核结论正确.研究结果可为实际工程中大型储罐的设计提供借鉴.

Large storage tanks feature large diameters and thin walls,combined with heavy roof loads and working condition loads such as negative pressure,wind pressure,and snow loads.As a result,significant tensile and compressive stresses occur along both circumferential and axial directions of the tank shell.Verifying strength and stability under biaxial stress conditions is therefore particularly important.This paper analyzes and compares design methods for biaxial stress in large storage tanks specified by the American standard API 620-2025 Design and construction of large,welded,low-pressure storage tanks and the Russian standard SP 495.1325800-2020 Isothermal tanks for storage of liquefied gases design rules.Through a stability verification case of the cylindrical shell under axial compression,it is proposed that,although API 620-2025 does not provide a formula for instability checking under simultaneous longitudinal and circumferential compression,the special case in Appendix F of API 620-2025 where the cylinder shell is under axial compression and no compression or tension acts circumferentially—can be used as a simplified method for longitudinal instability verification.The verification conclusions from this simplified calculation are compared with results from the instability verification method in SP 495.1325800.2020 and numerical simulations performed by Ansys Workbench,confirming the correctness of the simplified approach.The results indicate that for the biaxial stress design of large storage tanks,the simplified longitudinal instability calculation based on the Appendix F special case of API 620-2025 is valid.This study provides useful references for the design of large storage tanks in engineering practice.

余涛;王永朝;戚家明;万娟

中国石油工程建设有限公司西南分公司,四川 成都 610041中国石油天然气集团有限公司工程和物装管理部,北京 100007江苏国信液化天然气有限公司,江苏 南通 226400中国石油工程建设有限公司西南分公司,四川 成都 610041

双向应力圆柱筒体经向受压稳定性美国标准俄罗斯标准Ansys

Biaxial stressCylindrical shellAxialCompressionStabilityAmerican standardRussian StandardAnsys

《天然气与石油》 2026 (4)

21-27,7

10.3969/j.issn.1006-5539.2026.04.003

评论