首页|期刊导航|天津工业大学学报|多孔质气体轴承用石墨烯/青铜复合材料的制备及其性能

多孔质气体轴承用石墨烯/青铜复合材料的制备及其性能OA

Preparation and performance of graphene/bronze composite materials for porous gas bearings

中文摘要英文摘要

为了满足气体轴承多孔质及高性能的需求,采用粉末冶金和化学气相沉积相结合的方法,制备了石墨烯/青铜多孔复合材料,并考察其力学性能和耐腐蚀性能.结果表明:镍的加入减少了石墨烯的缺陷,并使石墨烯与青铜基体的界面结合更加紧密,掺杂镍的石墨烯/青铜多孔复合材料的平均维氏硬度和抗拉强度分别达到 103 HV 和 126 MPa,相较于多孔青铜分别提升了 34%和 70%;石墨烯片层堆叠形成致密阻隔层,镍掺杂促进合金表面形成致密的氧化膜,相较于多孔青铜该复合材料自腐蚀电位由-0.389 V正移至-0.266 V,多孔复合材料的耐腐蚀性能显著提升.

To meet the requirements of porous structure and high performance for gas bearings,graphene/bronze porous composite materials were fabricated by combining powder metallurgy and chemical vapor deposition(CVD),and their mechanical and corrosion resistance properties were investigated.The results demonstrated that the addition of nickel reduced defects in graphene and achieved tighter interfacial bonding between graphene and the bronze matrix.The nickel-doped graphene/bronze porous composites achieved a hardness of 103 HV and a tensile strength of 126 MPa,representing 34%and 70%improvements compared with pure porous bronze,respectively.Graphene sheets stacked to form a dense barrier layer.Nickel doping facilitated the formation of compact oxide films on the alloy surface.Compared with porous bronze,the corrosion potential positively shifted from-0.389 V to-0.266 V,so the corrosion resistance of the porous composite was significantly enhanced.

乔志军;张亮宇

天津工业大学 机械工程学院,天津 300387天津工业大学 航空航天学院,天津 300387

通用工业技术

化学气相沉积石墨烯青铜基复合材料镍掺杂多孔材料

chemical vapor depositiongraphenebronze matrix compositenickel dopingporous materials

《天津工业大学学报》 2026 (4)

20-25,6

国家自然科学基金项目(52075369)

10.3969/j.issn.1671-024x.2026.04.003

评论