改进型永磁同步电机模型预测转矩控制OA
Improved model predictive torque control for permanent magnet synchronous motor
为了降低表贴式永磁同步电机(Surface Permanent Magnet Synchronous Motor,SPMSM)传统模型预测转矩控制(Model Predictive Torque Control,MPTC)的转矩脉动,提出一种在传统模型预测转矩控制基础上运用多步预测的改进方法,通过在多个控制周期内对转矩与磁链进行预测和对比,确保所选电压矢量在整个预测时域内的最优性.基于 PMSM 数学模型,构建具有延时补偿的 MPTC 控制策略;推导了具有延时补偿的单步与多步 MPTC 的电流、转矩及磁链预测方程和代价函数.仿真结果表明:该控制方法的性能优于传统 MPTC 方法,相比于传统 MPTC 降低了电流 THD 与转矩脉动.
In order to reduce the torque ripple of the traditional model predictive torque control(MPTC)for surface permanent magnet synchronous motors(SPMSM),an improved method employing multi-step prediction on the basis of the traditional MPTC was proposed.By predicting and comparing the torque and flux linkage over multiple control cycles,the optimality of the selected voltage vector over the entire prediction horizon was ensured.Based on the mathematical model of the PMSM,an MPTC control strategy with delay compensation was constructed;the current,torque,and flux linkage prediction equations as well as the cost function for single step and multi step MPTC with delay compensation were derived.It was shown by the simulation results that the performance of this control method was superior to that of the traditional MPTC,and the current THD and torque ripple were reduced in comparison with the traditional MPTC.
刘博扬;石书琪;文豪;杨春
邵阳学院 电气工程学院,湖南 邵阳 422000邵阳学院 电气工程学院,湖南 邵阳 422000邵阳学院 电气工程学院,湖南 邵阳 422000邵阳学院 电气工程学院,湖南 邵阳 422000
信息技术与安全科学
永磁同步电机模型预测转矩控制多步预测
permanent magnet motorsmodel predictive torque controlmulti-step model predictive
《农业装备与车辆工程》 2026 (8)
63-69,7
邵阳学院研究生科研创新项目"基于多步模型预测转矩控制的电动汽车PMSM研究"(CX2025SY048)教育部供需对接就业育人项目(N2024100812877,2024101743308,2024102269845)邵阳学院研究生科研创新项目"车用IPMSM宽速域控制系统实时仿真测试平台的开发与验证"(CX2025SY046)
评论