首页|期刊导航|农业装备与车辆工程|基于多目标优化的商用车电池框架轻量化设计

基于多目标优化的商用车电池框架轻量化设计OA

Lightweight design of commercial vehicle battery framework based on multi-objective optimization

中文摘要英文摘要

以商用车电池框架为研究对象,旨在增强轻量化设计开发过程的目标导向性,缩短产品开发周期并降低研发成本.通过实车模态试验验证有限元模型的精度,基于仿真结果,结合灵敏度分析与交互效应分析,筛选关键部件作为优化变量.采用拉丁超立方抽样生建设计空间样本点,以 OptiStruct 为求解器计算响应值,并基于 Isight 平台,以质量最小、一阶固有频率最大、应力最小为目标,构建多约束多目标优化数学模型.通过对比多种近似模型,确定径向基函数(Radial Basis Function,RBF)为最优近似模型,引入 NSGA-Ⅱ算法进行轻量化优化,最终从 Pareto 解集中获取最优方案.结果表明,优化后的电池框架满足全工况安全要求,质量减轻 4.1%,最大应力降低 9.5%,一阶固有频率略有下降,实现了轻量化与静态强度提升的双重目标.

A commercial vehicle battery frame was taken as the research object,and the study was aimed at enhancing the goal orientation of the lightweight design and development process,shortening the product development cycle,and reducing R&D costs.The accuracy of the finite element model was verified through real-vehicle modal tests.Based on the simulation results,combined with sensitivity analysis and interaction effect analysis,key components were screened as optimization variables.Latin hypercube sampling was adopted to generate design space sample points,with OptiStruct used as the solver to calculate the response values.Based on the Isight platform,a multi-constraint,multi-objective optimization mathematical model was constructed with the objectives of minimizing mass,maximizing the first-order natural frequency,and minimizing stress.By comparing multiple approximation models,the radial basis function(RBF)was determined to be the optimal approximation model.The NSGA-II algorithm was introduced for lightweight optimization,and finally the optimal solution was obtained from the Pareto set.The results showed that the optimized battery frame met the safety requirements under all operating conditions,with the mass reduced by 4.1%,the maximum stress decreased by 9.5%,and the first-order natural frequency slightly reduced,thereby achieving the dual goals of lightweighting and static strength improvement.

唐宽祥;周帅;范志先;冯昊;李伟

山东交通学院 汽车工程学院,山东 济南 250300山东交通学院 汽车工程学院,山东 济南 250300中国重型汽车集团有限公司,山东 济南 250301山东交通学院 汽车工程学院,山东 济南 250300山东交通学院 汽车工程学院,山东 济南 250300

交通工程

电池框架试验设计近似模型多目标优化NSGA-Ⅱ

battery frameexperimental designapproximate modelmulti-objective optimizationNSGA-II

《农业装备与车辆工程》 2026 (8)

44-50,7

山东省重大专项项目"新能源商用车高效电驱动系统开发与应用"(2024CXGC010301)济南市科技计划项目"基于大模型的新能源商用车故障检测诊断多源异构生态平台"(202527027)

10.3969/j.issn.1673-3142.2026.08.007

评论