首页|期刊导航|农业装备与车辆工程|基于OptiStruct的某乘用车铝合金轮毂有限元分析

基于OptiStruct的某乘用车铝合金轮毂有限元分析OA

Finite Element Analysis of a passenger car aluminum alloy wheel hub based on OptiStruct

中文摘要英文摘要

为评估某乘用车铝合金轮毂的结构性能并探索轻量化潜力,基于 OptiStruct 建立某乘用车铝合金轮毂弯曲工况及 36 组径向多角度加载有限元模型.弯曲工况法兰面出现 293 MPa 局部应力峰值,引入热点应力法取相邻 5 单元应力均值得到结构热点应力 131.4 MPa,避免直接对比屈服强度导致的误判.36 组径向工况表明,轮毂最大等效应力随加载角度呈周期性波动(113 MPa ~ 146 MPa),单一角度加载存在局限性.轮毂主体应力仅 20 MPa ~ 70 MPa,提出增大过渡圆角、变厚度轮辐及优化减重槽等轻量化方案,可为铝合金轮毂的精细化设计提供参考.

To evaluate the structural performance of a passenger car aluminum alloy wheel hub and explore its lightweight potential,finite element models of the wheel hub under a bending condition and 36 sets of radial multi-angle loading conditions were established based on OptiStruct.A local peak stress of 293 MPa was observed on the flange surface under the bending condition.By introducing the hot spot stress method,the structural hot spot stress was obtained as 131.4 MPa by taking the average stress of five adjacent elements,thereby avoiding misjudgment caused by direct comparison with the yield strength.The 36 sets of radial loading conditions indicated that the maximum equivalent stress of the wheel hub fluctuated periodically with the loading angle(ranging from 113 MPa~146 MPa),demonstrating the limitation of single-angle loading.Since the principal stress in the wheel hub body was only 20 MPa~70 MPa,lightweight schemes such as increasing the transition fillet,employing variable-thickness spokes,and optimizing weight-reducing pockets were proposed.The research findings provide a reference for the refined design of aluminum alloy wheel hubs.

杨甄鑫;李国东

河南科技大学 应用工程学院,河南 三门峡 472100三门峡戴卡轮毂制造有限公司,河南 三门峡 472100

交通工程

铝合金轮毂热点应力法有限元分析轻量化

aluminum alloy wheel hubhot spot stress methodfinite element analysislight weight

《农业装备与车辆工程》 2026 (8)

38-43,6

2023年度三门峡市科技攻关计划项目(2023L02054)三门峡市铝基材料精深加工创新联合体

10.3969/j.issn.1673-3142.2026.08.006

评论