面向山地路况的农用运输车架多工况结构优化OA
Multi-condition structural optimization of agricultural transport vehicle frame for mountainous road conditions
针对山地农用运输车架应力集中、刚度冗余问题,提出基于多工况分析的结构优化方法.以福建某型车架为对象,在 ANSYS Workbench 中建立有限元模型,设定满载弯曲、极限扭转、紧急制动和极限转弯 4 种典型工况,分析应力与变形特征.基于拓扑优化,以质量最小为目标,体积分数和应力为约束进行轻量化设计.结果表明:原始车架在极限扭转下最大等效应力达 110.99 MPa,是结构强度去冗余校核的核心工况;优化后车架质量减轻 15.3%,应力集中显著降低.验证了该方法在提升车架安全性与轻量化方面的有效性.
To address the issues of stress concentration and stiffness redundancy in mountain agricultural transport vehicle frames,a structural optimization method based on multi-condition analysis was proposed.Taking a certain type of frame in Fujian as the object,a finite element model was established in ANSYS Workbench,and four typical working conditions(full-load bending,extreme torsion,emergency braking,and extreme turning)were set,and the stress and deformation characteristics were analyzed.Based on topology optimization,a lightweight design was carried out with the goal of minimizing mass,constrained by volume fraction and stress.The results showed that the maximum equivalent stress of the original frame under extreme torsion was found to be 110.99 MPa,which was identified as the core condition for structural strength de-redundancy verification;after optimization,the frame mass was reduced by 15.3%,and stress concentration was significantly reduced.The effectiveness of this method in improving frame safety and lightweight was verified.
刘善勇;孙权明;徐良
安徽交通职业技术学院 轨道交通学院,安徽 合肥 230000安徽工业大学 机械工程学院,安徽 马鞍山 243032安徽交通职业技术学院 轨道交通学院,安徽 合肥 230000
交通工程
山地农用车车架有限元分析多工况拓扑优化轻量化设计
mountain agricultural vehiclevehicle framefinite element analysismulti-conditiontopology optimizationlightweight design
《农业装备与车辆工程》 2026 (8)
12-16,25,6
2025年度安徽省教育厅科学研究项目(自然科学版)"基于RSM法的地铁基坑开挖过程中邻近既有桥梁桩基变形影响因素研究"(2025AHGXZK30978)2025年度安徽省职业与成人教育协会教育科研规划课题"生态化模型引领的职教数字化转型资源动态建构研究——以轨道交通通信信号专业为例"(AZCJ2025024)2025年第二批校级专业带头人"城市轨道交通通信信号技术"(2025xjzy26)
评论