南海环境下半潜式风机系泊系统布置方案对比研究OA
系泊系统是保障浮式海上风电机组定位与安全运行的核心组成部分,其受力特性与动态响应直接关系到整机的发电稳定性与结构安全性.该文以 DTU 10 MW海上风机为研究对象,结合南海典型海域的环境条件,对其系泊系统的布置与优化进行数值建模与动力学分析.通过引入 FAST程序及 TurbSim模块,构建湍流风与不规则波的耦合载荷模型,验证风机-平台-系泊系统的整体耦合计算方法.随后模拟分析多种工况下系泊系统的动力响应,系统地比较 3×1、3×2 和 3×3 三种系泊布置方案的力学性能差异.该文的研究成果可为南海及类似海域浮式风机的系泊系统布置设计与优化提供参考与支持.
The mooring system serves as a key component ensuring the positional stability and structural safety of floating offshore wind turbines.Its dynamic behavior directly affects the power generation efficiency and operational reliability of the entire system.This study focuses on the DTU 10 MW offshore wind turbine and investigates the mooring performance of its semi-submersible floating foundation under the environmental conditions typical of the South China Sea.A coupled numerical model was established using FAST program and TurbSim module to simulate the interaction between turbulent wind and irregular waves.The accuracy of the wind-platform-mooring coupling method was validated through free-decay tests.Subsequently,dynamic analyses under different operating conditions were performed to compare three mooring configurations:3×1,3×2,and 3×3.The findings of this research provide technical guidance for the mooring design of floating wind turbines in the South China Sea and similar deep-water regions.
李彬坡;芮子俊;王延林;张大勇;王刚
山东电力工程咨询院有限公司,济南 250000大连理工大学,辽宁 盘锦 124000大连理工大学,辽宁 盘锦 124000大连理工大学,辽宁 盘锦 124000大连理工大学,辽宁 盘锦 124000
信息技术与安全科学
DTU 10 MW风机半潜式平台系泊系统数值仿真动态响应
DTU 10 MW wind turbinesemi-submersible platformmooring systemnumerical simulationdynamic response
《科技创新与应用》 2026 (26)
20-23,28,5
评论