基于双目标拓扑优化方法的换热器流动换热性能分析OA
Analysis of Heat Transfer and Flow Performance of Heat Exchangers Based on Dual-objective Topology Optimization Method
对换热器进行双目标拓扑优化设计,通过分析拓扑图及目标函数、表面温度等变化曲线,系统探究优化过程中雷诺数、流体体积分数等关键参数对换热器结构特征与热流性能的影响规律.研究结果表明,经过拓扑优化设计的换热器内部通道呈现出明显的多级分叉结构特征,在ω=0.5、Re=75条件下,流体体积分数为0.6时目标函数可低至-0.185,表面最高温度也为同组最低的348.74 K,流动换热性能最优,且流道数量随雷诺数的增加呈现明显的增长趋势,不同的热源呈现方式和出入口数量分布也有力影响着拓扑优化结构,不同参数互相作用形成不同的流道拓扑结构.
A dual-objective topology optimization design of a heat exchanger was conduc-ted.By analyzing the topological configurations alongside the evolution of the objective function and surface temperature,the influence of key parameters,including the Reynolds number and fluid volume fraction,on the structural characteristics and thermal-hydraulic performance was systematically investigated.The results show that the internal channels of the topology-optimized heat exchanger exhibit a distinct hierarchical bifurcation struc-ture.Under the conditions of ω=0.5 and Re=75,the objective function can be as low as-0.185 when the fluid volume fraction is 0.6,and the maximum surface temperature is also the lowest in the same group at 348.74 K,demonstrating optimal flow and heat transfer performance.Moreover,the number of flow channels increases significantly with Reynolds number.Different heat sources and inlets/outlets number distributions also strongly influence the topology-optimized structure,and different parameters interact to form different flow channel topological structures.
黄秀薇;蔡博;张程鑫;徐佳乐
大连交通大学詹天佑学院(中车学院),大连 116028大连交通大学詹天佑学院(中车学院),大连 116028大连交通大学詹天佑学院(中车学院),大连 116028大连交通大学詹天佑学院(中车学院),大连 116028
能源科技
换热器双目标拓扑优化热流性能雷诺数
heat exchangerdual-objective topology optimizationthermal-hydraulic per-formanceReynolds number
《青岛大学学报(自然科学版)》 2026 (3)
32-39,58,9
评论