首页|期刊导航|汽车工程学报|"踏板机器人-车辆"广义动力学模型建立

"踏板机器人-车辆"广义动力学模型建立OA

Generalized Dynamic Modeling of a Pedal Robot-Vehicle System

中文摘要英文摘要

驾驶机器人在智能汽车测试中扮演着至关重要的角色.传统驾驶机器人控制车辆采用级联架构,系统间的误差传递导致控制精度不足.提出一种"踏板机器人-车辆"广义动力学模型,以减小误差传递.设计了平行四边形双关节机构,将运动学求解时间复杂度降至O(1);基于达朗贝尔原理推导了电机负载转矩,消除经验公式带来的惯性力动态耦合误差;构建了"踏板机器人-车辆"广义动力学模型,实现了"电压-车速"的直接映射.通过仿真验证了该广义动力学模型的有效性,为高精度车速跟踪控制提供了可靠模型.

Driving robots play a crucial role in intelligent vehicle testing.Traditional driving robots employ a cascaded architecture for vehicle control,where error propagation between subsystems leads to insufficient control accuracy.To address this issue,this paper proposes a generalized dynamic model of the"Pedal robot-Vehicle"system to reduce error propagation.A parallelogram double-joint mechanism is designed,reducing the time complexity of the kinematic solutions to O(1).The motor load torque is derived based on D'Alembert's principle,eliminating dynamic coupling errors of inertial forces introduced by empirical formulas.A generalized dynamics model of the"pedal robot-vehicle"system is constructed to achieve a direct mapping from motor voltage to vehicle speed.Simulation results verify the effectiveness of the proposed generalized dynamics model,providing a reliable basis for high-precision vehicle speed tracking control.

何友国;邓肯;蔡英凤;袁朝春;李祎承;李艺

江苏大学 汽车工程研究院,江苏,镇江 212013江苏大学 汽车工程研究院,江苏,镇江 212013江苏大学 汽车工程研究院,江苏,镇江 212013江苏大学 汽车工程研究院,江苏,镇江 212013江苏大学 汽车工程研究院,江苏,镇江 212013中国汽车工程研究院股份有限公司,重庆 401122

交通工程

驾驶机器人踏板机器人广义动力学模型平行四边形结构建模

driving robotpedal robotgeneralized dynamics modelparallelogram structuremodeling

《汽车工程学报》 2026 (5)

831-843,13

国家重点研发计划项目(2022YFB2503302)国家自然科学基金项目(52225212,52272418,U22A20100,5217120774)江苏大学农业装备学院项目(NZXB20210103)

10.3969/j.issn.2095‒1469.2026.05.10

评论