首页|期刊导航|露天采矿技术|矿用带式输送机托辊旋转阻力影响因素分析

矿用带式输送机托辊旋转阻力影响因素分析OA

Analysis of influencing factors of rotation resistance of mining belt conveyor rollers

中文摘要英文摘要

矿用托辊旋转阻力是影响带式输送机能效的关键因素.在分析矿用托辊典型结构特征的基础上,系统阐述了其旋转阻力的来源构成,并将轴承摩擦力矩与密封摩擦力矩的叠加机制作为阻力计算的基本框架,分别从径向载荷、转速、环境温度、润滑状态4个维度剖析了各因素对旋转阻力的影响规律与作用机理.研究表明:矿用托辊旋转阻力为受工况条件强耦合作用的动态变量,径向载荷与转速的增大均会导致阻力单调上升,温度通过改变润滑脂黏度产生非线性影响,而粉尘侵入与高湿度环境驱动的润滑状态时变性退化是阻力随服役时间持续攀升的根本原因.

The rotation resistance of mining rollers is a key factor affecting the energy efficiency of belt conveyors.Based on the analysis of the typical structural characteristics of mining rollers,this article systematically elaborates on the sources and composition of the rotational resistance,uses the superposition mechanism of bearing friction torque and seal friction torque as the basic framework for resistance calculation,and analyzes the influence law and mechanism of each factor on rotational resistance from the four dimensions of radial load,rotational speed,environment temperature and lubrication state.Research shows that the rotational resistance of mining rollers is a dynamic variable affected by strong coupling of working conditions.The increase in radial load and rotational speed will cause the resistance to rise monotonically.Temperature has a nonlinear effect by changing the viscosity of the grease.The time-varying degradation of the lubrication state driven by dust intrusion and high-humidity environment is the fundamental reason why the resistance continues to rise with service time.

邢云峰

北京科正平工程技术检测研究院有限公司,北京 100007

矿业与冶金

矿用带式输送机托辊旋转阻力摩擦机理润滑状态影响因素

mining belt conveyor rollerrotation resistancefriction mechanismlubrication statusinfluencing factor

《露天采矿技术》 2026 (4)

39-43,5

10.13235/j.cnki.ltcm.20250338

评论