某核电站汽水分离再热器爆破膜破裂原因OA
Reason for rupture of steam water separation reheater rupture membrane in a nuclear power plant
某核电站运行时汽水分离再热器爆破膜发生破裂故障.采用宏观观察、系统参数调查、检修工艺调查、化学成分分析、制造工艺分析等方法对该爆破膜的破裂原因进行分析.结果表明:爆破膜的质量不合格,在制造过程中缺少两次成拱和一道热处理工序,导致实际爆破压力较设计要求偏低约25%,最终导致爆破膜发生破裂.
During the operation of a nuclear power plant,a rupture accident occurred in the rupture membrane of the steam water separation reheater.The cause of rupture of the blasting membrane was analyzed by using macroscopic observation,system parameter investigation,maintenance process investigation,chemical composition analysis,production process analysis.The results show that the quality of the blasting membrane was unqualified,and two arching and one heat treatment process were missed in the manufacturing process,resulted in an actual blasting pressure that was about 25%lower than the design requirements,ultimately leading to the rupture of the rupture membrane.
吴孟雄
大亚湾核电运营管理有限责任公司,深圳 518100
机械制造
汽水分离再热器爆破膜热处理备件管理破裂
steam water separation reheaterrupture membraneheat treatmentspare part managementrupture
《理化检验-物理分册》 2026 (8)
41-44,4
评论