双裂隙组合岩体力学性能与裂纹演化的颗粒流模拟研究OA
PFC-based numerical simulation of mechanical behavior and crack evolution in double-flawed composite rock masses
针对含双裂隙的组合岩体,为揭示围压与结构面几何特征的协同作用机制,基于颗粒流数值模拟方法对含双裂隙的组合岩体进行双轴压缩模拟试验,探讨在不同围压与岩桥倾角条件下力学特性、贯通模式与微裂纹扩展规律.研究结果表明:峰值强度、峰前弹性应变能及峰值轴向应变等指标均与围压水平有显著的正相关关系;岩桥倾角是影响贯通模式的关键因素,0°~90°倾角下试样的贯通模式大致可分为四类,同一倾角不同围压条件下岩桥区域的贯通模式大致相似,但围压的存在显著影响裂隙尖端裂纹的形式;不同岩桥倾角试样力链分布有所差异,围压增强了压力链的集中程度,显著抑制了拉力链的分布范围.
To investigate the synergistic mechanism between confining pressure and geometric characteristics of structural planes in rock masses containing double fractures,a biaxial compression simulation test was conducted on combined rock masses with double fractures using the particle flow numerical simulation method.The mechanical properties,crack coalescence patterns,and micro-crack evolution under different confining pressures and rock bridge inclination angles were investigated.The research results indicate that the peak strength,elastic strain energy before the peak,and peak axial strain are all significantly positively correlated with the confining pressure level.The inclination angle of rock bridges is a key factor influencing the failure mode.Under inclination angles of 0°~90°,the failure modes of specimens can be roughly categorized into four types.For the same inclination angle,the failure modes in the rock bridge zone under different confining pressures are generally similar,but the presence of confining pressure significantly affects the form of cracks at the crack tip.The force chain distribution varies among specimens with different rock bridge inclination angles,and confining pressure enhances the concentration of pressure chains while significantly restricting the distribution range of tension chains.
李洪炜;刘海明;王志良;康永水
昆明理工大学建筑工程学院,昆明 650500昆明理工大学建筑工程学院,昆明 650500昆明理工大学建筑工程学院,昆明 650500中国科学院武汉岩土力学研究所岩土力学与工程安全全国重点实验室,武汉 430071
建筑与水利
岩石力学双轴压缩力学特性裂纹扩展颗粒流复合岩层双裂隙
rock mechanicalbiaxial compression testmechanical propertycrack growthparticle flowcomposite rock stratadouble fissures
《华中科技大学学报(自然科学版)》 2026 (8)
59-66,8
云南省基础研究计划重点资助项目(202501AS070105).
评论