基于多参数面积系数的气层识别方法OA
Gas layeridentification method based on multi-parameter area coefficient
老井复查过程中,受早期测井技术条件与复杂地质因素制约,多数老井仅保留常规测井曲线,缺少核磁共振、阵列声波等高精度特殊测井资料支撑.常规测井流体识别精度有限,致使部分潜力储层被误判为干层、水层或未解释层.针对低孔低渗储层测井响应特征模糊、岩性与有机质干扰强、多相流体响应非线性叠加的识别难点,提出一种基于多参数权重模型的叠合面积系数气层识别方法,该方法整体采用3级递进判别流程.储层筛选阶段,通过自然伽马—声波时差叠合面积剔除泥岩夹层等非储层,建立岩性敏感评价指标;流体性质判别阶段,利用声波时差—电阻率叠合面积构建流体识别指数,量化油气层与水层的响应差异;气层识别阶段,基于中子—密度孔隙度叠合面积实现气层与油层的有效区分.通过权重系数法融合3类叠合面积特征参数,建立气层综合识别模型.现场应用结果表明,该模型在研究区验证井中的整体解释符合率可达78.3%,识别精度优于传统气层判别方法.该技术将传统静态参数阈值判别转换为多参数动态面积耦合分析,显著提升了复杂气藏的测井解释精度,为老区气层挖潜提供了低成本、高效率的技术手段.
During old-well re-evaluation,constrained by early-stage logging technologies and complex geological conditions,most old wells only retain conventional well-logging curves,without high-precision special logging data such as nuclear magnetic resonance and array acoustic logging.Limited accuracy of fluid identification using conventional logging leads to some potential reservoirs being misinterpreted as dry layers,water layers or uninterpreted zones.Aiming at the identification challenges of low-porosity and low-permeability reservoirs,including ambiguous logging responses,strong interferences from lithology and organic matter,and nonlinear superposition of multiphase-fluid responses,this paper proposes a gas layer identification method using superimposed area coefficients based on a multi-parameter weight model.A three-level progressive discrimination workflow is adopted in this method.At the reservoir screening stage,non-reservoir beds such as mudstone interbeds are eliminated via the superimposed area of gamma-ray and acoustic transit time,and lithology-sensitive evaluation indicators are established.At the fluid-property discrimination stage,a fluid identification index is constructed using the superimposed area of acoustic transit time and resistivity to quantify the response differences between gas-bearing reservoirs and water layers.At the gas layer identification stage,the superimposed area of neutron and density porosities is applied to effectively distinguish gas beds from oil beds.A comprehensive gas layer identification model is established by fusing the three types of superimposed-area characteristic parameters with the weight-coefficient method.Field application results show that the overall interpretation coincidence rate of the proposed model reaches 78.3%for verification wells in the study area,and its identification accuracy outperforms conventional gas layer discrimination methods.Converting the traditional static-parameter threshold discrimination into multi-parameter dynamic area-coupling analysis,this technique greatly improves the logging interpretation accuracy for complex gas reservoirs,and provides a low-cost and high-efficiency technical approach for tapping gaslayer potential in mature oil-gas areas.
代保庆
中国石化河南油田分公司勘探开发研究院,河南 南阳 473000
能源科技
老井复查常规测井权重系数法气层识别
old well re-evaluationconventional well-loggingweight coefficient methodgas layer identification
《石油地质与工程》 2026 (5)
20-26,7
评论