首页|期刊导航|河南城建学院学报|室内大空间喷口送风气流组织数值模拟研究

室内大空间喷口送风气流组织数值模拟研究OA

Numerical simulation study on airflow organization of jet supply in large indoor spaces

中文摘要英文摘要

针对大空间室内热环境调控难题,采用正交实验设计与计算流体力学(CFD)数值模拟方法,并以热舒适性为评价指标,研究送风温度、送风速度、喷口直径及送风角度对室内气流组织及热舒适性的影响.结果表明,各参数敏感度排序依次为:送风温度、喷口直径、送风速度、水平喷口角度、垂直喷口角度.送风温度每升高2℃,温度均匀性提升6.0%~6.9%;喷口直径每增加20 mm,温度均匀性下降34.5%~70.0%.当送风温度为19~21℃、喷口直径为194~214 mm时,室内PMV值接近舒适区间且速度场较优.协同优化可使温度均匀性与流速稳定性分别提升12.7%和23.5%.研究表明,合理匹配送风温度与喷口尺寸可有效改善大空间室内热环境,为喷口送风系统的优化设计与运行调控提供定量参考.

To address the challenge of regulating the indoor thermal environment in large spaces,an orthogo-nal experimental design and Computational Fluid Dynamics(CFD)simulation were adopted.The Predicted Mean Vote(PMV)was used as the evaluation index to investigate the effects of supply air temperature,sup-ply air velocity,nozzle diameter,and supply air angle on indoor airflow distribution.The results showed that the sensitivity of the parameters ranked as follows:supply air temperature,nozzle diameter,supply air veloci-ty,horizontal angle and vertical angle.For every 2℃increase in supply air temperature,temperature unifor-mity improved by 6.0%to 6.9%.For every 20 mm increase in nozzle diameter,temperature uniformity de-creased by 34.5%to 70.0%.When the supply air temperature was 19℃to 21℃and the nozzle diameter was 194 to 214 mm,the indoor PMV approached the comfort range and the velocity field was more satisfato-ry.Through coordinated optimization,temperature uniformity and airflow stability were improved by 12.7%and 23.5%,respectively.The results indicate that a proper match between supply air temperature and nozzle diameter can effectively improve the indoor thermal environment in large spaces,and provide a quantitative reference for the optimal design and operation control of nozzle air supply systems..

锁寒冰;罗振鸣;李凯鹏;孟照峰;王龙基;张帅杰;曲如意

中原工学院 智慧能源与环境学院,河南 郑州 450007中原工学院 智慧能源与环境学院,河南 郑州 450007中原工学院 智慧能源与环境学院,河南 郑州 450007中原工学院 智慧能源与环境学院,河南 郑州 450007中原工学院 智慧能源与环境学院,河南 郑州 450007中原工学院 智慧能源与环境学院,河南 郑州 450007中原工学院 智慧能源与环境学院,河南 郑州 450007

建筑与水利

热环境气流组织数值模拟喷口射流碰撞送风

thermal environmentairflow organizationnumerical simulationnozzle jetimpinging air supply

《河南城建学院学报》 2026 (4)

70-79,10

河南省重点研发项目(251111321200)

10.14140/j.cnki.hncjxb.2026.04.008

评论