首页|期刊导航|黑龙江科技大学学报|悬臂式掘进机回转机构的优化及其疲劳特性

悬臂式掘进机回转机构的优化及其疲劳特性OA

Optimization of slewing mechanism of cantilever roadheader and its fatigue characteristics

中文摘要英文摘要

为提升悬臂式掘进机的截割性能,建立以回转半径和悬臂长度等参量的数学模型,采用粒子群算法优化掘进机回转机构参数,通过Ls-Dyna 对掘进机截割头钻进和摆动截割进行仿真,运用 EE-MD和样本熵分析截割头的三向载荷谱特征,通过结合ANSYS-Workbench 对优化前后回转台的疲劳寿命进行对比分析.结果表明:钻进纯煤优化后最小疲劳寿命增大9.1%,最小安全系数提高5.5%;钻进夹矸优化后最小疲劳寿命增大17.2%,最小安全系数提高10%;截割纯煤优化后最小疲劳寿命增大10.4%,最小安全系数提高4.9%;截割夹矸优化后最小疲劳寿命增大15.7%,最小安全系数提高6.1%.回转扭矩之差变小,提高了回转机构的稳定性,改善了回转机构的力学特性.

This paper intends to improve the cutting performance of roadheading,a mathematical model with the parameters of rotary radius and cantilever length is established,and the particle swarm al-gorithm is used to optimize the parameters of the rotary mechanism of the roadheader,Ls-Dyna is used to simulate the drilling and swing cutting of the cutting head of the roadheader.The three-directional load spectrum characteristics of the cutting head are analyzed using EEMD and sample entropy,and the fa-tigue life of the rotary table before and after optimization is compared and analyzed according to the simu-lated loads combined with the ANSYS-Workbench.The fatigue life of the rotary table before and after op-timization is compared and analyzed by combining ANSYS-Workbench with simulated loads.The results show that:the minimum fatigue life increases by 9.1%and the minimum safety factor improves by 5.5%after the optimization of drilling pure coal;the minimum fatigue life increases by 17.2%and the mini-mum safety factor improves by 10%after the optimization of drilling gangue;the minimum fatigue life in-creases by 10.4%and the minimum safety factor increases by 4.9%after the optimization of cutting pure coal;the minimum fatigue life increases by 15.7%and the minimum safety factor increases by 6.1%af-ter the optimization of cutting gangue.The difference of rotary torque becomes smaller,the stability of the rotary mechanism is improved,and the mechanical characteristics of the rotary mechanism are improved.

李德根;刘龙;许绍军;杨庆超

黑龙江科技大学 黑龙江省采掘机械关键结构及装备工程技术研究中心,哈尔滨 150022黑龙江科技大学 机械工程学院,哈尔滨 150022黑龙江科技大学 机械工程学院,哈尔滨 150022黑龙江科技大学 机械工程学院,哈尔滨 150022

矿业与冶金

悬臂式掘进机回转机构粒子群算法疲劳载荷谱

cantilever tunneling machineslewing mechanismparticle swarm optimization algo-rithmfatigueload spectrum

《黑龙江科技大学学报》 2026 (5)

760-765,6

黑龙江省省属本科高等学校基本科研业务费项目(2024-KYYWF-0159)博士后科研启动金项目(2024BSH03)

10.3969/j.issn.2095-7262.2026.05.009

评论