加力燃烧室一体化支板-凹腔稳定器研究进展OA
Research progress on integrated strut-cavity flameholders for afterburners
随着先进航空发动机对加力燃烧室低流阻、紧凑化及高可靠性的要求提高,供油与稳焰结构一体化成为重要方向.一体化支板-凹腔组合稳定器集整流、供油和稳焰功能于一体,可减少独立构件并改善流动与燃油组织.本文综述其结构、流动及燃油组织研究进展,重点分析结构参数、空间配置及来流条件对回流结构和气动损失的影响,并归纳横向液体射流穿透、雾化及多喷嘴条件下燃油空间分布规律.现有研究表明:支板下游回流与凹腔回流的空间关系影响局部流动,进口余旋、冷却射流和通道边界条件进一步改变流场及气动损失;燃油输运受液气动量通量比、喷射角、支板局部结构、来流状态及喷嘴配置共同影响.相关规律受几何构型、来流状态和喷射条件影响,适用范围存在差异.面向实际环形加力燃烧室,后续应重点研究多支板、多喷嘴及非均匀来流条件下的流动与燃油组织,并完善兼顾气动损失、燃烧性能和热负荷的综合评价方法.
With increasingly stringent requirements for reduced aerodynamic losses,compactness,and high reliability in advanced aeroengine afterburners,the integration of fuel injection and flameholding structures has become an important design approach.The integrated strut-cavity flameholder combines flow straightening,fuel injection,and flame stabilization within a compact configuration,thereby reducing the number of discrete components and improving flow organization and fuel distribution.This paper reviewed recent advances in the structural development,flow organization,and fuel transport and distribution of integrated strut-cavity flameholders.Particular attention was given to the effects of geometric parameters,spatial arrangement,and inflow conditions on recirculation structures and aerodynamic losses,as well as to the penetration and atomization of liquid jets in crossflow and the spatial fuel distribution under multi-injector conditions.Existing studies indicate that the spatial relationship between the recirculation zones downstream of the strut and within the cavity governs the local flow organization,while inlet residual swirl,cooling jets,and flow-passage boundary conditions further affect the flow field and aerodynamic losses.Fuel transport is jointly influenced by the liquid-to-gas momentum flux ratio,injection angle,local strut geometry,inflow conditions,and injector arrangement.The reported trends vary with geometric configuration,inflow conditions,and injection parameters,and therefore have different ranges of applicability.For practical annular afterburners,further studies should focus on flow organization and fuel distribution under multi-strut,multi-injector,and nonuniform inflow conditions,together with the development of comprehensive evaluation methods accounting for aerodynamic losses,combustion performance,and thermal loads.
田运福;年子旭;唐勇;刘舆帅;穆勇;阮昌龙
中国科学院 工程热物理研究所,北京 100190||北京理工大学空天科学与技术学院,北京 100081||轻型涡轮动力全国重点实验室,北京 100190北京理工大学空天科学与技术学院,北京 100081北京理工大学空天科学与技术学院,北京 100081中国科学院 工程热物理研究所,北京 100190||轻型涡轮动力全国重点实验室,北京 100190中国科学院 工程热物理研究所,北京 100190||轻型涡轮动力全国重点实验室,北京 100190||青岛航空技术研究院,山东 青岛 266400中国科学院 工程热物理研究所,北京 100190||轻型涡轮动力全国重点实验室,北京 100190||青岛航空技术研究院,山东 青岛 266400
航空航天
加力燃烧室一体化支板凹腔稳定器流动组织横向射流
afterburnerintegrated strutcavity flameholderflow organizationliquid jet in crossflow
《火箭推进》 2026 (4)
102-114,13
国家自然科学基金(52476139,52276141)
评论