汇合弯头形状对船用柴油机排气管阻力的影响OA
Study on effect of junction geometry on resistance of marine diesel engine exhaust pipe
为了改善某船柴油机排气管内流动结构,减少柴油机排气阻力,本文对双涡轮增压器柴油机的排气汇合弯头进行优化,基于计算流体力学的仿真计算分析方法,对原始排气管与优化后的排气管内流动进行仿真,比较了排气管各分段的阻力与流动结构,分析了阻力的来源与优化后阻力下降的原因.仿真结果表明,对排气管汇合弯头的形状优化可以减少支管出流对总管的冲击,改善排气管内流速分布,消除旋转二次流动,减少湍流强度与湍动能生成率,从而使排气管的总压损失下降了多达32.5%.对排气管上游部件的形状改变还能够显著影响排气管下游管段及部件的摩擦或局部总压损失,因此后续开展研究时应针对完整的排气系统进行.
Flow structure inside the marine diesel engine exhaust pipe is improved and exhaust resistance is re-duced via shape optimization of the exhaust junction for a dual-turbocharger diesel engine.Three-dimensional nu-merical simulations based on computational fluid dynamics(CFD)are performed on the original and optimized ex-haust pipes to compare flow structure and flow resistance in each pipe section,and to reveal the mechanism of flow resistance and the cause of resistance reduction.The results of simulation show that the optimization of the exhaust junction geometry weakens the jet impingement from branch pipes to the main pipe,optimizes the flow velocity dis-tribution,eliminates swirling secondary flow,and reduces turbulence intensity and turbulent kinetic energy produc-tion rate,leading to a maximum reduction of 32.5%in total pressure loss of the exhaust pipe.Geometry modifica-tion of upstream exhaust components exerts considerable influence on frictional and local total pressure loss in downstream sections,indicating that further investigations should be carried out for integrated exhaust systems.
谢胤;吴中正;杨卫英;饶宇
中国船舶及海洋工程设计研究院,上海 200011中国船舶及海洋工程设计研究院,上海 200011中国船舶及海洋工程设计研究院,上海 200011上海交通大学 机械与动力工程学院,上海 200240
交通工程
柴油机排气系统减阻二次流动湍流数值仿真计算流体力学优化船舶
diesel enginesexhaust systemsdrag reductionsecondary flowturbulencenumerical simulationcomputational fluid dynamicsoptimizationship
《哈尔滨工程大学学报》 2026 (8)
1690-1696,7
国家自然科学基金项目(11972230).
评论