三维开缝翼型的建模及水动力数值特性分析OA
Modeling and numerical analysis of hydrodynamic characteristics of three-dimensional slotted airfoils
针对水下环境中三维开缝翼型水动力特性尚不明确、原有航空开缝设计难以直接适用的问题,本文开展三维开缝翼型的建模与水动力数值特性分析.三维开缝翼型通过在翼型开设缝隙以改善流体动力特性,在航空领域已被广泛用于提升升力与延缓失速.但水与空气在密度、黏度上差异显著,水下流动规律与空中存在明显区别,因此三维开缝翼型在水下的应用效果亟待重新评估与优化.本文采用雷诺平均纳维-斯托克斯方法,通过编程技术对缝隙曲线的位置加以调整,利用Creo软件构建不同参数的三维模型,并在STAR-CCM+平台上开展流场数值计算.实施了密集网格加密处理以及网格收敛性分析,以保障计算结果的准确性.研究了不同攻角、缝隙位置、宽度、斜度对升阻比的影响.研究结果表明,通过合理优化这些参数,能够有效提高三维开缝翼型的升阻比.本文为水下高效开缝翼型的设计提供了理论指导与实践参考.
Aiming at the unclear hydrodynamic characteristics of three-dimensional slotted airfoils in underwater environments and the difficulty in directly applying existing aviation slotted designs,this paper conducts modeling and numerical analysis of their hydrodynamic characteristics.As a design to improve fluid dynamic performance by adding slots or openings on the airfoil,three-dimensional slotted airfoils are widely used in aviation to enhance lift and delay stall.However,considering the differences in density and viscosity between water and air,the underwa-ter flow mechanism differs significantly from that in air,so the application effect of three-dimensional slotted air-foils underwater needs urgent re-evaluation and optimization.In this paper,the Reynolds-Averaged Navier-Stokes(RANS)method is adopted.We adjust the position of slot curves through programming,establish three-dimensional models with different parameters using Creo software,and conduct detailed numerical flow field calcu-lations on the STAR-CCM+platform.Intensive grid refinement and grid convergence analysis are performed to en-sure the accuracy of computational results.We investigate the effects of different angles of attack,slot positions,widths,and slopes on the lift-drag ratio.The results show that rational optimization of these parameters can effec-tively improve the lift-drag ratio of three-dimensional slotted airfoils.This work provides crucial theoretical guid-ance and practical references for the design of efficient underwater slotted airfoils.
沈纪新;周皓;马蕾;李嘉杰;叶礼裕
哈尔滨工程大学 青岛创新发展基地,山东 青岛 266400上海倍豪船舶科技有限公司,上海 200439上海倍豪船舶科技有限公司,上海 200439哈尔滨工程大学 青岛创新发展基地,山东 青岛 266400哈尔滨工程大学 青岛创新发展基地,山东 青岛 266400||沪东中华造船(集团)有限公司,上海 200129
交通工程
三维开缝翼型数值模拟雷诺平均纳维-斯托克斯方法水动力特性升阻比
three-dimensional slotted airfoilnumerical simulationreynolds mean Navier-Stokes(RANS)methodhydrodynamic characteristicslift-drag ratio
《哈尔滨工程大学学报》 2026 (8)
1671-1681,11
国家自然科学基金项目(52571338,52371316).
评论