首页|期刊导航|哈尔滨工程大学学报|考虑层间各向异性摩擦的柔性立管结构拉弯响应分析

考虑层间各向异性摩擦的柔性立管结构拉弯响应分析OA

Analysis of tension-bending response of flexible risers considering interlayer anisotropic friction

中文摘要英文摘要

柔性立管是海洋油气开采的关键装备之一,为了明确非黏结柔性立管层间各向异性摩擦对管道弯曲结构性能影响,本文建立了柔性立管精细化三维有限元分析模型,并引入各向异性摩擦模型对铠装钢丝与防磨层层间摩擦进行刻画,分析并揭示层间各向异性摩擦对柔性立管弯曲刚度、铠装钢丝应力以及相对滑移的影响规律.结果表明:沿抗拉铠装钢丝缠绕方向的摩擦系数对管道弯曲刚度和抗拉铠装钢丝应力大小及分布影响明显,沿缠绕方向的摩擦系数越大,管道弯曲响应非线性特征越明显,相同曲率下的抗拉铠装钢丝应力越大;在对非黏结柔性立管结构性能进行设计和分析时需要重点关注沿抗拉铠装层缠绕方向的摩擦系数.本研究为柔性立管结构高性能设计提供了方法.

Flexible risers are critical components in offshore oil and gas exploitation.To clarify the influence of interlayer anisotropic friction on the bending structural behavior of unbonded flexible risers,a refined three-dimensional finite element model is developed,in which an anisotropic friction model is incorporated to character-ize the interlayer contact behavior between the tensile armor wires and the anti-wear layer.The effects of anisotro-pic friction on the bending stiffness,armor wire stress and relative sliding of the riser are investigated.The results show that the friction coefficient in the winding direction of the tensile armor wires has a significant effect on the bending stiffness of risers,as well as the magnitude and distribution of stress in the tensile armor wires.As this friction coefficient increases,the nonlinear characteristics of the bending response of risers become more pronounced,and higher armor wire stresses are induced under the same curvature.particular attention should be paid to the friction coefficient in the winding direction when designing and analyzing the structural performance of unbonded flexible risers.This study provides a method for the high-performance design of flexible riser structure.

阎军;郭峰;翟墨;英玺蓬;王伟;侯远哲;苏琦;卢海龙

大连理工大学 力学与航空航天学院,辽宁 大连 116024||大连理工大学 工业装备结构分析优化与CAE软件全国重点实验室,辽宁 大连 116024大连理工大学 力学与航空航天学院,辽宁 大连 116024天津海洋石油工程股份有限公司,天津 300461南方电网科学研究院有限责任公司,广东 广州 510663天津海洋石油工程股份有限公司,天津 300461大连理工大学 力学与航空航天学院,辽宁 大连 116024大连理工大学 力学与航空航天学院,辽宁 大连 116024大连理工大学 力学与航空航天学院,辽宁 大连 116024

数理科学

柔性立管抗拉铠装层各向异性摩擦拉弯荷载抗拉铠装钢丝层间摩擦相对滑移弯曲性能

flexible risertensile armor layeranisotropic frictiontension-bending loadtensile armor wireinterlayer frictionrelative slidingbending performance

《哈尔滨工程大学学报》 2026 (8)

1638-1646,9

国家自然科学基金项目(52201312,12432005)辽宁省自然科学基金项目(2023-BSBA-052).

10.11990/jheu.202503010

评论