首页|期刊导航|哈尔滨工程大学学报|拉伸-扭转载荷下非黏结柔性管层间作用分析

拉伸-扭转载荷下非黏结柔性管层间作用分析OA

Analysis of interlayer interaction for unbonded flexible pipes under tensile-torsional loads

中文摘要英文摘要

本文针对非黏结柔性立管各层互不粘接的结构特点,开展了拉伸-扭转载荷下非黏结柔性管层间相互作用特征及承载特性研究.通过建立非黏结柔性立管轴对称承载的解析模型和数值模型,对比分析拉伸、顺时针扭转、逆时针扭转下的承载响应和层间接触应力,验证了模型的正确性.分析拉伸与逆时针扭转组合承载发现,随着拉伸载荷的增加,非黏结柔性管层间接触面积不断增加,直至完全接触,这一过程使得拉伸载荷对逆时针扭转刚度的影响呈明显非线性.分析拉伸与顺时针扭转组合承载得到,拉伸载荷与顺时针扭矩必须在满足合理范围内,才能保证外抗拉铠装层始终与第二防磨带接触,避免径向屈曲.

Considering the unbonded structural feature of flexible risers,interlayer interaction and bearing charac-teristics are investigated under tensile-torsional combined loads.Analytical and numerical models are established for the axisymmetric response of unbonded flexible risers.Loading responses and interlayer contact stresses under tension,clockwise torsion and counterclockwise torsion are compared,verifying the validity of the models.For tension-counterclockwise torsion coupling,the interlayer contact area gradually increases to full contact with rising tensile load,leading to distinct nonlinearity in the effect of tension on counterclockwise torsional stiffness.For tension-clockwise torsion coupling,tensile load and clockwise torque should be limited within a reasonable range to maintain continuous contact between the outer tensile armor layer and the second anti-wear tape,thereby prevent-ing radial buckling.

雷清龙;侯植;祝效华;陈晨阳;马鹏

西南石油大学 机电工程学院,四川 成都 610500||四川省油气装备技术共享与服务平台,四川 成都 610500西南石油大学 机电工程学院,四川 成都 610500西南石油大学 机电工程学院,四川 成都 610500西南石油大学 机电工程学院,四川 成都 610500西南石油大学 机电工程学院,四川 成都 610500

海洋科学

非黏结柔性立管拉伸-扭转载荷层间相互作用接触应力组合载荷扭转刚度抗拉铠装层有限元模型

unbonded flexible risertensile-torsional loadsinterlayer interactioncontact stresscombined load-ingtorsional stiffnesstensile armor layerfinite element model

《哈尔滨工程大学学报》 2026 (8)

1627-1637,11

国家自然科学基金青年基金项目(52404007)西南石油大学自然科学启航计划(2022QHZ002).

10.11990/jheu.202506054

评论