基于传递误差的斜齿轮拓扑修形分析OA
Analysis of Topological Modification of Helical Gears Based on Transmission Error
传递误差会引发齿轮传动系统的振动与噪声,进而导致传动精度下降和零部件疲劳损伤.为改善此类问题,利用Romax 软件建立斜齿轮传动的仿真模型,结合最优拉丁超立方采样获得 300 组修形参数与传递误差数据,并采用 XGBoost 模型分析各修形参数对传递误差的影响权重.最后运用全因子法,以最小化传递误差为目标,对高权重修形参数进行寻优设计.结果表明:小齿轮齿向鼓与齿廓鼓对传递误差的影响权重分别为 77.3%与 13.5%,是齿轮修形的关键参数;经优化后的传递误差降幅达91.15%,最大接触应力降幅达4.08%,有效改善了齿轮传动性能.
Transmission error induces vibration and noise in gear transmission systems,leading to a degradation of transmission accuracy and fatigue damage of components.To address these issues,a simulation model of the helical gear transmission was established using Romax software.Combined with optimal Latin hypercube sampling,300 sets of modification parameters and corresponding transmission error data were obtained,and the XGBoost model was employed to analyze the impact weight of each modification parameter on transmission error.Finally,a full factorial method was applied to optimize the high‑weight modification parameters with the objective of minimizing transmission error.The results indicate that pinion lead crowning and profile crowning are the key gear modification parameters,accounting for 77.3%and 13.5%of the influence on transmission error,respectively.After optimization,the transmission error was reduced by 91.15%,and the maximum contact stress decreased by 4.08%,effectively improving the performance of the gear transmission.
石楠;张明超;彭飞
唐山工业职业技术大学,河北 唐山 063299爱信(苏州)汽车技术中心有限公司唐山分公司,河北 唐山 064099唐山工业职业技术大学,河北 唐山 063299
机械制造
传递误差齿轮修形XGBoost算法权重分析
transmission errorgear modificationXGBoost algorithmweight analysis
《工业技术与职业教育》 2026 (4)
23-27,5
唐山工业职业技术大学校级课题"基于传递误差的减速器齿轮拓扑修形研究"(课题编号:XJKT202502),主持人石楠.
评论