首页|期刊导航|工业技术与职业教育|基于OpenSees的UHPC加固混凝土柱轴压性能研究

基于OpenSees的UHPC加固混凝土柱轴压性能研究OA

Research on the Axial Compressive Behavior of Concrete Columns Strengthened with UHPC Based on OpenSees

中文摘要英文摘要

为探究超高性能混凝土(Ultra-High Performance Concrete,简称UHPC)加固对普通钢筋混凝土柱轴压性能的提升效果与作用机理,本文基于 OpenSees 有限元软件建立 UHPC 加固混凝土柱数值模型,结合试验数据验证模型的可靠性.研究结果显示,采用 Concrete04 本构模型模拟 UHPC、Steel02 本构模型模拟钢筋,可较为精准地模拟 UHPC 加固混凝土柱荷载—位移曲线,并且模拟值与试验值的误差控制在5%以内;UHPC加固层厚度与柱轴压承载力呈正相关,厚度小于30 mm时承载力下降较为明显,而大于 30 mm 时承载力增幅趋缓,推荐工程中选用 20~30 mm 的加固层厚度可兼顾提升效果与经济性.本研究为 UHPC 加固混凝土柱的工程数值模拟提供了可行方法,也为该加固技术的工程设计与应用提供了理论依据和参数参考.

To investigate the strengthening effect and underlying mechanism of ultra-high performance concrete(UHPC)on the axial compressive behavior of ordinary reinforced concrete columns,this study develops a numerical model of UHPC-strengthened concrete columns using OpenSees and validates its reliability against experimental data.The results demonstrate that the load-displacement curve of UHPC-strengthened concrete columns can be accurately simulated using the Concrete04 constitutive model for UHPC and the Steel02 model for steel reinforcement,with errors within 5%between simulation and test results.The thickness of the UHPC strengthening layer is positively correlated with the axial compressive capacity of the column:when the thickness is less than 30 mm,the enhancement in load-bearing capacity diminishes significantly,whereas the increase levels off when the thickness exceeds 30 mm.A strengthening layer thickness of 20–30 mm is therefore recommended to balance structural enhancement and cost efficiency.This study offers a viable approach for the numerical simulation of UHPC-strengthened concrete columns and provides a theoretical foundation and parametric guidance for the engineering design and application of this strengthening technique.

苏政;李文怡;潘霞

兵团兴新职业技术学院,新疆 铁门关 841007兵团兴新职业技术学院,新疆 铁门关 841007兵团兴新职业技术学院,新疆 铁门关 841007

建筑与水利

UHPC加固轴压性能OpenSEES

UHPC strengtheningaxial compressive behaviorOpenSees

《工业技术与职业教育》 2026 (4)

6-9,4

评论