全SiC两路并联三相PWM整流器的设计与实现OA
Design and Implementation of a Two-Channel Parallel Three-Phase PWM Rectifier Using All-SiC Devices
为应对大功率直流充电桩在充电功率等方面的挑战,以全 SiC 器件的两路并联三相脉宽调制(PWM)整流器为研究对象,分析其工作原理与数学模型,并针对共模电压与低频、高频环流的产生机理进行分析.提出一种基于"公共电压外环+独立电流内环"的控制架构,融合了分相载波反相调制与零序分量注入的技术,形成具备低频、高频环流抑制与共模电压抑制能力的复合约束策略.通过仿真验证控制策略的合理性.搭建 1 台60 kW全SiC 的两路并联三相PWM整流器,并通过实验验证方案的可行性,为三相 PWM整流器在大功率应用中的设计与优化提供参考.
To address the challenges of high-power DC charging piles in terms of charging power,a two-channel parallel three-phase pulse width modulation(PWM)rectifier using All-SiC devices is taken as the research object.Its operating principle and mathematical model are analyzed,and the generation mechanisms of common-mode voltage as well as low-frequency and high-frequency circulating currents are investigated.On this basis,a control architecture based on the"common DC voltage outer loop+independent current inner loop"is proposed,which integrates phase-separated carrier phase-opposition disposition and zero-sequence component injection techniques.A composite constraint strategy with the capability to suppress low-frequency and high-frequency circulating currents as well as common-mode voltage is thus formed.Furthermore,simulations are carried out to verify the rationality of the control strategy.Finally,a 60 kW two-channel parallel three-phase PWM rectifier prototype using All-SiC devices is built.Experiments verify the feasibility of the proposed scheme.This work provides a reference for the design and optimization of three-phase PWMrectifiers in high-power applications.
蔡杰鑫;周俊辉;张文康;吴宏伟;毛行奎
福州大学 电气工程与自动化学院,福建 福州 350108福州大学 电气工程与自动化学院,福建 福州 350108福州大学 电气工程与自动化学院,福建 福州 350108福州大学 电气工程与自动化学院,福建 福州 350108福州大学 电气工程与自动化学院,福建 福州 350108
信息技术与安全科学
大功率充电桩三相PWM整流器环流抑制共模电压抑制空间矢量脉宽调制
high-power charging pilethree-phase PWM rectifiercirculating current suppressioncommon-mode voltage suppressionspace vector pulse width modulation(SVPWM)
《电器与能效管理技术》 2026 (8)
69-78,10
评论