首页|期刊导航|电焊机|可规模化超疏水表面的简易构建及其防腐-减阻双功能调控

可规模化超疏水表面的简易构建及其防腐-减阻双功能调控OA

A Facile Method for Constructing Scalable and Low-Cost Superhydro-phobic Coating with Anti-Corrosion and Drag-Reduction Properties

中文摘要英文摘要

通过合理设计超疏水涂层的微观结构,可减小基底与液体之间的固-液接触面积,抑制腐蚀介质渗透并降低流动阻力.本文以KH550偶联剂改性二氧化硅(KH550@SiO2)、硬脂酸改性二氧化钛(STA@TiO2)和水性聚氨酯(WPU)为原料,采用喷涂法在铝基材料表面制备仿生超疏水复合涂层.通过水接触角、减阻测试和电化学分析评价涂层性能.所得复合涂层的水滴接触角为163.4°、滚动角为4°,表现出优异的超疏水性.空气层与涂层致密结构的协同作用使其在3.5 wt.%NaCl溶液中具有良好的腐蚀抑制效果.此外,复合涂层球体入水时能够形成连续气腔,这对于维持和增强涂层在液体中的减阻能力至关重要.该超疏水复合涂层的设计与制备方法在金属大面积防腐及航行减阻方面具有良好的应用前景.

Through the reasonable design of the microstructure of superhydrophobic coatings,the solid-liquid contact area between the substrate and the liquid can be reduced,the penetration of corrosive media can be inhibited,and the flow resis-tance can be lowered.In this paper,a biomimetic superhydrophobic composite coating on an aluminum substrate was pre-pared by spraying KH550 coupling-agent-modified silica(KH550@SiO2)and stearic-acid-modified titanium dioxide(STA@TiO2)mixed with waterborne polyurethane.The performance was evaluated by water contact-angle measurements,drag-reduction tests,and electrochemical analysis.The composite coating exhibited a droplet contact angle of 163.4° and a rolling angle of 4°,demonstrating excellent superhydrophobicity.The synergistic effect of the air layer and the dense coating structure resulted in excellent corrosion inhibition in a 3.5 wt.%NaCl solution.In addition,the composite-coated spheres formed a continuous air cavity during water entry,which is essential for extending the drag-reduction capability of the coat-ing in liquids.The design and preparation of the superhydrophobic composite coating show promising applications in large-area metal corrosion protection and navigation drag reduction.

张迎康;邓远婷;殷祚炷;张体明

南昌航空大学 材料科学与工程学院,江西 南昌 330063南昌航空大学 材料科学与工程学院,江西 南昌 330063南昌航空大学 材料科学与工程学院,江西 南昌 330063南昌航空大学 材料科学与工程学院,江西 南昌 330063

矿业与冶金

超疏水复合涂层仿生减阻防腐蚀

superhydrophobicbiomimeticdrag reductionanticorrosion

《电焊机》 2026 (9)

81-92,12

江西省自然科学基金(20224BAB204046,20232BAB211018)哈尔滨工业大学先进焊接与连接国家重点实验室项目(AWJ-23M26)江西省研究生创新专项资金(YC2023-013,YC2023-018).

10.7512/j.issn.1001-2303.2026.09.09

评论