氟化物组分对E308LT1-1不锈钢药芯焊丝焊接工艺性能的影响研究OA
Study on the Effect of Fluoride Composition on the Welding Perfor-mance of E308LT1-1 Stainless Steel Flux-Cored Wire
研究药芯中氟化物(NaF与LiF)比例对E308LT1-1不锈钢药芯焊丝焊接工艺性能的影响.保持氟化物总质量分数为2%,制备了5种不同NaF/LiF比例的焊丝,利用高速摄像、扫描电镜、ICP、X射线荧光光谱等手段,测试了熔滴过渡频率、飞溅率、焊缝氧化色及熔渣微观组织.结果表明,氟化物通过影响电弧稳定性、熔滴受力状态及熔渣物化性质,从而调控工艺性能.当药芯中NaF与LiF质量比为3∶1时,焊接飞溅率最低(3.34%);而提高LiF比例有助于改善焊缝氧化色,但会降低电弧稳定性与立焊操作性.当NaF与LiF比例为1∶1时,焊丝的综合工艺性能达到最优.
The effect of fluoride(sodium fluoride NaF and lithium fluoride LiF)ratio in the flux core on the welding perfor-mance of E308LT1-1 stainless steel flux-cored wire was systematically investigated.Five types of wires with different NaF/LiF ratios were designed.The droplet transfer behavior,welding spatter,weld oxidation color,and slag microstructure were analyzed by means of high-speed photography,scanning electron microscopy,ICP,and X-ray fluorescence spectrometry.The results indicated that fluorides regulated the welding performance by influencing arc stability,droplet force state,and the physicochemical properties of the slag.When the mass ratio of NaF to LiF in the flux core was 3:1,the spatter rate reached its minimum value of 3.34%.Increasing the LiF proportion contributed to improving the weld oxidation color but re-duced arc stability and vertical-up welding operability.When the NaF-to-LiF ratio was 1:1,the wire exhibited optimal over-all welding performance.
赵佳;徐晓龙;蒋勇;袁均山;官忠波;甘梓靖
四川大西洋焊接材料股份有限公司,四川 自贡 643000四川大西洋焊接材料股份有限公司,四川 自贡 643000四川大西洋焊接材料股份有限公司,四川 自贡 643000四川大西洋焊接材料股份有限公司,四川 自贡 643000四川大西洋焊接材料股份有限公司,四川 自贡 643000四川大西洋焊接材料股份有限公司,四川 自贡 643000
矿业与冶金
不锈钢药芯焊丝氟化物飞溅焊缝氧化色熔滴过渡
stainless steel flux-cored wirefluoridespatterweld oxidation colordroplet transfer
《电焊机》 2026 (9)
58-65,8
评论