激光-KTIG复合焊接工艺下的匙孔行为研究与工艺特点OA
Study of Keyhole Behavior and Process Characteristics in Laser-KTIG Hybrid Welding
为了扩大KTIG的焊接工艺窗口和电弧稳定性,采用激光-KTIG复合焊接方法对对碳钢(Q235)与不锈钢(304L)进行焊接试验.研究了激光照射位置、焊接速度及激光功率对复合焊接过程稳定性和焊缝成形的影响,并借助X射线透射成像原位观测装置,实时采集了复合焊接与单独KTIG焊接过程中匙孔的生成与演化图像.结果表明,激光照射于匙孔前壁时形成电弧穿孔模式,照射于匙孔后壁时形成激光穿孔模式.在电弧穿孔模式下,焊接稳定性与电弧形态主要受到焊接速度与激光功率的影响.在匙孔产生与演化方面,激光的照射改变了电弧的燃弧位置与挺直性,致使电弧匙孔发生偏移,偏移量的多少取决于焊接速度和激光功率,通过合理的设置参数,可将匙孔优化为竖直状态,竖直状态下的匙孔降低了工艺气孔的倾向.
To broaden the process window and improve arc stability of KTIG welding,laser-KTIG hybrid welding was em-ployed to carry out butt-welding experiments on Q235 carbon steel and 304L stainless steel.The influences of laser irradia-tion position,welding speed and laser power on process stability and weld formation of hybrid welding were investigated.An in-situ X-ray transmission imaging system was utilized to acquire real-time images of keyhole initiation and evolution during hybrid welding and single KTIG welding.The results reveal that the arc-penetration mode is generated when the laser irradiates the front wall of the keyhole,while the laser-penetration mode forms as the laser irradiates the rear wall of the key-hole.Under the arc-penetration mode,welding stability and arc morphology are predominantly governed by welding speed and laser power.For keyhole generation and evolution,laser irradiation modifies the arc ignition position and arc stiffness,resulting in keyhole deflection whose magnitude depends on welding speed and laser power.Appropriate parameter configu-ration can achieve a vertical keyhole geometry,which mitigates the susceptibility to process-related porosity.
闫瑞志;杜德志;李柱良;孙润生;白宇鹏;李金龙
山东奥太电气有限公司,山东 济南 250014山东奥太电气有限公司,山东 济南 250014山东奥太电气有限公司,山东 济南 250014山东奥太电气有限公司,山东 济南 250014山东奥太电气有限公司,山东 济南 250014山东奥太电气有限公司,山东 济南 250014
矿业与冶金
KTIG匙孔电弧形态X射线衍射原位复合焊接
KTIGkeyholearc morphologyin-situ X-ray diffractionhybrid welding
《电焊机》 2026 (9)
1-9,65,10
评论