首页|期刊导航|控制与信息技术|基于参数关联驱动的三大件式转向架快速设计方法

基于参数关联驱动的三大件式转向架快速设计方法OA

Rapid Design Method for Three-Piece Bogies Driven by Parameter Association

中文摘要英文摘要

针对铁路货车三大件式转向架在设计过程中面临的轴重、轨距、车辆接口及减振形式组合多样、参数需反复查表换算、模块接口依赖人工匹配等问题,文章提出一种基于参数关联驱动的快速设计方法.建立涵盖车辆技术条件、总装、接口、部件及簧组五级参数模型,通过直接映射、计算映射和条件映射实现参数传递;构建模块筛选、接口匹配及侧架、摇枕关联变形策略,基于项目数据自动生成总装配置、簧组方案、三维模型及 BOM.以 25 t 轴重、1 435 mm 轨距、常摩擦减振转向架为例进行验证,结果表明,方案设计周期可由11~13 d缩短至3 d.

The design process for three-piece bogies of railway freight cars is complicated by multiple combinations of axle loads,track gauges,vehicle interfaces,and damping configurations,resulting in heavy workload for parameter query and reliance on manual module interface matching.This paper proposes a rapid design method driven by parameter association.A five-level parameter model is established:vehicle technical requirements,assembly,interfaces,components,and spring groups.Direct,calculated and conditional mappings are introduced for parameter passing.Strategies for module filtering,interface matching,and associated deformation of side frames and bolsters are integrated to generate assembly configuration,spring group schemes,three-dimensional models and BOMs accounting for project data.Verification based on a bogie design with a 25-t axle load,1,435-mm gauge bogie,and constant-friction damping shows the proposed method reduces the conceptual design cycle from 11-13 days to 3 days.

黄雪燕;任丽娟;向志英;邹德顺

中车长江运输设备集团有限公司,湖北 武汉 430212中车长江运输设备集团有限公司,湖北 武汉 430212中车长江运输设备集团有限公司,湖北 武汉 430212中车长江运输设备集团有限公司,湖北 武汉 430212

交通工程

铁路货车三大件式转向架研发数字化快速设计参数关联模块化设计

railway freight carthree-piece bogieR&D digitalizationrapid designparameter associationmodular design

《控制与信息技术》 2026 (4)

54-59,6

中国中车股份有限公司重大专项科技研究开发计划项目(2026CKA6732026CKA674)

10.13889/j.issn.2096-5427.2026.04.008

评论