300MW等级汽轮机组通流改造关键技术与热经济性效果评估OA
Assessment of Key Technologies and Thermo-Economic Performance of Flow Path Retrofit in 300 MW-Class Steam Turbines
在"双碳"目标的推动下,300 MW 级亚临界湿冷机组正面临小时利用率急剧下降、需承担深度调峰任务以及供热耦合等多重挑战.在此背景下,实施通流改造被视为最具经济效益的途径之一.本文以某热电厂 1 号机组的流通部分与灵活性改造为例,系统阐述了"高效三维叶片+整体内缸"技术体系,建立"试验-修正-对标"一体化评价方法.性能评估结果表明,在汽轮机热耗验收工况下,机组热耗率由改造前的 8139 kJ/kWh 降至 7706 kJ/kWh,降幅达5.3%;加权热耗率为7854 kJ/kWh,低于保证值10 kJ/kWh.从汽缸效率来看,高压缸效率提升4.3%,中压缸效率提升1.8%,低压缸改进幅度达 7.7%.此外,在供热期实现 20%负荷深度调峰运行,预计每年可节约标准煤 2.55 万 t,减少二氧化碳排放量 6.35 万 t.本文所提出的技术路径与评估体系,可为同类型机组的改造升级提供参考.
Under the impetus of the"dual carbon"goals,300 MW-class subcritical wet-cooled units are facing multiple challenges such as a sharp decline in hourly utilization,the need to undertake deep peak shaving tasks,and heating coupling.Against this backdrop,implementing flow path retrofit is regarded as one of the most economically beneficial approaches.It takes the flow section and flexibility transformation of Unit 1 of a certain thermal power plant as an example,systematically expounds the key technical system of"high-efficiency 3D blades+integral inner casing",and establishes an integrated evaluation method of"testing-correction-benchmarking".The performance evaluation results show that under the turbine heat acceptance condition,the heat rate of the unit decreases from 8139 kJ/kWh before the transformation to 7706 kJ/kWh,with a reduction rate of 5.3%.The weighted heat consumption rate is 7854 kJ/kWh,which is 10 kJ/kWh lower than the guaranteed value.In terms of cylinder efficiency,the efficiency of high-pressure cylinders increases by 4.3%,that of medium-pressure cylinders by 1.8%,and the improvement rate of low-pressure cylinders reaches 7.7%.In addition,during the heating period,achieving 20%load deep peak shaving operation is expected to save 25 500 t of standard coal and reduce carbon dioxide emissions by 63 500 t annually.The technical path and evaluation system proposed have reference for the transformation and upgrading of similar units.
边菁华
国家能源集团承德热电有限公司,河北 承德 067102
能源科技
300MW汽轮机通流改造热耗率供热灵活性经济性评估
300 MW steam turbineflow path retrofitheat rateheating flexibilityeconomic evaluation
《东北电力技术》 2026 (8)
49-53,5
评论