首页|期刊导航|测试科学与仪器|基于镀金PDMS薄膜的光纤F-P传感器用于压力和温度测量

基于镀金PDMS薄膜的光纤F-P传感器用于压力和温度测量OA

Optic fiber F-P sensor based on a gold-coated PDMS film for pressure and temperature measurements

中文摘要英文摘要

光纤法布里-珀罗(Fabry-Pérot,F-P)传感器具有体积小、重量轻、灵敏度高、抗电磁干扰等优点,在生物医学、精密检测等领域日益受到重视.本文阐述了一种基于镀金聚二甲基硅氧烷(Polydimemethysiloxane,PDMS)膜结构的光纤F-P传感器的直接制造方法.该传感器的F-P腔由PDMS表面的金膜层、光纤端面和内部空气腔组成.利用PDMS的热膨胀和高形变能力,该传感器在温度和压力测量中的灵敏度分别达到820 nm·℃-1和6.05 mm·kPa-1,非线性度分别达到满量程的2.19%和6.75%.实验结果证实了基于镀金PDMS薄膜的光纤F-P传感器在响应温度和压力测量方面具有优异的性能,为未来在受限环境中的精确测量开辟了新的可能性.

Optic fiber Fabry-Pérot(F-P)sensors are compact,lightweight,highly sensitive,and resistant to electromagnetic interference,making them increasingly valued in fields such as biomedical and precision detection.This work elucidates a straightforward fabrication method for an optic fiber F-P sensor based on a gold-coated polydimethylsiloxane(PDMS)membrane structure.The F-P cavity of the sensor is composed of a gold film layer on the PDMS surface,the end surface of optical fiber,and an internal air cavity.By taking advantage of the thermal expansion and high deformability of PDMS,the sensitivity of the sensor in temperature and pressure measurements respectively reached 820 nm·℃-1 and 6.05 mm·kPa-1,and the nonlinearity of sensors reached 2.19%of full scale and 6.75%of full scale,respectively.Our work ultimately confirms that the optic fiber F-P sensor based on the gold-coated PDMS film exhibits excellent performance in responding to temperature and pressure measurements.Moreover,the sensor opens new possibilities for future precise measurements in confined environments.

赵梓鸿;李锐锐

中北大学 极端环境光电动态测试与仪器全国重点实验室,山西 太原 030051中北大学 极端环境光电动态测试与仪器全国重点实验室,山西 太原 030051||山西省交通科学研究院集团有限公司,山西 太原 030032

温度压力聚合物膜法布里-珀罗腔薄膜镀金

temperaturepressurepolymer membraneFabry-Pérot cavitythin film gold plating

《测试科学与仪器》 2026 (3)

459-467,9

10.62756/jmsi.1674-8042.2026039

评论