首页|期刊导航|测试科学与仪器|低功耗HMAC硬件架构的设计与分析

低功耗HMAC硬件架构的设计与分析OA

Design and analysis of a low-power HMAC hardware architecture

中文摘要英文摘要

基于哈希的消息认证码(Hash-based message authentication code,HMAC)的认证模块通常会在功率受限的嵌入式安全终端和边缘可信计算设备中长时间运行,易产生严重的能源瓶颈问题.为解决这一难题,提出了一种针对HMAC-SHA-256的模块级协同低功耗硬件架构.该架构充分利用HMAC算法的分阶段计算特性,通过顶层有限状态机(Finite state machine,FSM)对时钟门控、数据通路门控和电源门控进行统一调度,在不同计算阶段选择性关闭非活动模块,从而有效降低时钟翻转、组合逻辑中的冗余切换以及静态泄漏功耗.基于SMIC 55 nm工艺、工作频率为100 MHz的门级仿真结果表明,在不降低工作频率的前提下,所提出的架构将总功耗从40.830 mW降低至19.902 mW,功耗降幅达到51.3%,同时逻辑综合等效面积呈现约14.8%的下降趋势.该架构能够在满足性能约束的条件下显著降低任务能耗,为资源受限场景下的HMAC硬件实现提供了一种可复用的低功耗设计思路.

Hash-based message authentication code(HMAC)modules often operate for extended periods in power-constrained embedded security terminals and edge-trusted computing devices,easily creating a significant energy bottleneck issues.To address this challenge,we propose a module-level collaborative low-power hardware architecture for HMAC-SHA-256.Exploiting the phased computational characteristics of the HMAC algorithm,a top-level finite state machine(FSM)coordinates clock gating,datapath gating,and power gating to selectively disable inactive modules across different computation stages,thereby reducing clock activity,redundant switching in combinational logic,and leakage power.Gate-level simulations based on an SMIC 55 nm technology at 100 MHz demonstrate that,without degrading operating frequency,the proposed architecture reduces total power consumption from 40.830 mW to 19.902 mW(a 51.3%reduction),while achieving an approximately 14.8%reduction in logic-synthesis-equivalent area.These results indicate that the proposed approach effectively minimizes task energy under strict performance constraints and provides a reusable low-power design methodology for HMAC hardware implementations in resource-constrained environments.

李锦明;晁志恒;韩昕烨

中北大学 半导体与物理学院,山西 太原 030051中北大学 半导体与物理学院,山西 太原 030051利物浦大学 电子电气工程系,布朗洛山 L69 7ZX

HMAC-SHA256低功耗硬件时钟门控电源门控数据通路门控嵌入式安全系统

HMAC-SHA256low-power hardwareclock gatingpower gatingdatapath gatingembedded security system

《测试科学与仪器》 2026 (3)

435-445,11

10.62756/jmsi.1674-8042.2026037

评论