基于光栅泰伯效应的三轴MOEMS加速度计的设计与验证OA
Design and verification of triaxial MOEMS accelerometer based on grating Talbot effect
提出一种基于微纳光栅泰伯效应的单片式三轴微光机电系统(Micro-opto-electromechanical systems,MOEMS)加速度计,将面内与离面传感结构单片集成于单一芯片,实现全三轴加速度检测.该方案利用光学近场衍射特性,兼具高灵敏度、宽线性量程与优异的加速度分辨率特性.首先,建立了三轴加速度传感的泰伯效应理论模型,并采用主动光功率稳定技术,以抑制由于光源引起的光强漂移.其次,对机械结构与微纳光栅参数协同优化,显著提升了加速度计的标度因数.最后,仿真与实验验证了器件的工作原理,理论预测与实验结果吻合良好:所研制的光栅MOEMS加速度计外形尺寸仅16 mm×16 mm×0.4 mm,灵敏度达 2.9 V·g-1(非线性误差<0.68%),分辨率为 345 μg,离面与面内加速度计分别实现了优于 54.2 μg 的零偏稳定性和优于38.7 μg·Hz-1/2的速度随机游走.上述结果表明,该三轴加速度计在自主导航、汽车工业监测及工业机械状态评估等高精度三轴惯性传感中具有广阔应用潜力.
This paper presents a monolithic triaxial micro-opto-electromechanical systems(MOEMS)accelerometer utilizing the Talbot effect of micro-nano gratings,which integrates in-plane and out-of-plane sensing structures on a single chip to enable fully triaxial acceleration detection.Based on optical near-field diffraction,the design achieves high sensitivity,wide linear operating range,and superior acceleration resolution.A theoretical model utilizing the Talbot effect for triaxial acceleration sensing is rigorously established,and active optical power stabilization is integrated to mitigate intensity-induced drift caused by light source fluctuations.Through co-optimization of the mechanical structure and nano-grating parameters,the scale factor of the accelerometer is significantly enhanced.The working principle was validated through both simulation and experiment,with good agreement between theoretical predictions and experimental results.The fabricated MOEMS accelerometer,with a compact footprint of 16 mm×16 mm×0.4 mm,exhibits a sensitivity of 2.9 V·g-1(non-linearity<0.68%)and a resolution of 345 μg.The out-of-plane and in-plane accelerometers achieve bias instability below 54.2 μg and velocity random walk(VRW)below 38.7 μg·Hz-1/2,respectively.These results demonstrate the potential of the proposed architecture for high-precision triaxial inertial sensing in applications such as autonomous navigation,automotive industry monitoring,and industrial machinery condition assessment.
郭尚宙;赵一诺;金丽;解琨阳;贾鑫瑞;李孟委
中北大学 仪器与电子学院,山西 太原 030051||中北大学 前沿交叉科学研究院,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 仪器与电子学院,山西 太原 030051||中北大学 前沿交叉科学研究院,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 仪器与电子学院,山西 太原 030051||中北大学 前沿交叉科学研究院,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 前沿交叉科学研究院,山西 太原 030051中北大学 仪器与电子学院,山西 太原 030051||中北大学 前沿交叉科学研究院,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 仪器与电子学院,山西 太原 030051||中北大学 前沿交叉科学研究院,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051
微光机电系统加速度计泰伯效应单片三轴集成零偏稳定性微纳制造
micro-optical-electromechanical systems(MOEMS)accelerometerTalbot effectsingle-chip triaxial integrationzero bias stabilitymicro/nano-scale manufacturing
《测试科学与仪器》 2026 (3)
375-383,9
This work was supported by Fundamental Research Program of Shanxi Province(No.202403021221122).
评论