基于载波通讯的智能损管系统研究OA
Research on Intelligent Damage Control System Based on Carrier Communication
为优化船舶损害管制系统传统直连采集模式中设备多且分散、布线复杂的技术现状,本文提出了一种基于低压电力线载波通讯技术的智能损管系统设计方案.该系统采用二总线拓扑结构,将同一防火区内的载波变送器构建为闭环采集网络,通过回路控制卡与接口模块组成的有线主从通讯架构,实现对多类型测点信号的实时监测与采集.该智能损害管制系统有效提高了信号采集效率,降低了系统铺设和运维成本,为损管系统的轻量化、智能化升级提供了可行方案.
Traditional ship damage control systems use a direct-connection acquisition mode,with dispersed numerous devices and complex wiring.To optimize current state of this technology,this paper proposes an intelligent damage control system scheme based on low-voltage power line carrier communication technology.By adopting a two-bus topology,the system integrates carrier transmitters within the same fire zone into a closed-loop acquisition network.Real-time monitoring and acquisition of multi-type measuring point signals are realized via a wired master-slave communication architecture composed of loop control cards and interface modules.This intelligent damage control system effectively improves signal acquisition efficiency,reduces system deployment and maintenance costs,and provides a feasible solution for lightweight and intelligent upgrade of the damage control system.
刘珊;许林;郭晶
中国船舶集团有限公司第七一一研究所,上海 201108中国船舶集团有限公司第七一一研究所,上海 201108中国船舶集团有限公司第七一一研究所,上海 201108
信息技术与安全科学
低压电力线载波通讯智能损管系统二总线拓扑信号采集
low-voltage power line carrier communicationintelligent damage control systemtwo-bus topologysignal acquisition
《船电技术》 2026 (9)
50-56,7
评论