首页|期刊导航|沈阳航空航天大学学报|SLM过程中线性能量密度和保护气流方向对飞溅的影响

SLM过程中线性能量密度和保护气流方向对飞溅的影响OA

The influence of linear energy density and shielding gas flow direction on spatter in SLM process

中文摘要英文摘要

为研究激光选区熔化过程中产生的熔池及飞溅行为,搭建高速相机监测平台.利用高速相机在不同的保护气流方向和线性能量密度下以不同曝光时间拍摄单道扫描过程中的熔化图像.提出一种图像处理方法,对采集到的熔化过程图像进行处理.从飞溅数量、面积、角度等方面对保护气流方向和不同线性能量密度下飞溅的特征进行具体分析.研究结果表明,与线性能量密度相比,保护气流方向对飞溅特征的影响更为显著,建议在激光选区熔化过程中使用较低的线性能量密度(在适当范围内)结合逆气流方向来抑制飞溅.

In order to study the molten pool and spatter behavior during selective laser melting,a high-speed camera monitoring platform was built.The high-speed camera was used to capture the melting images in the single-channel scanning process under different shielding gas directions and linear energy densities at different exposure times.An image processing method was proposed to process the collected melting process images.The characteristics of spatter under different linear energy density and shielding gas direction were analyzed from the aspects of spatter number,area and angle.It is found that compared with the linear energy density,the direction of the shielding gas direction has a more significant effect on the spatter characteristics.It is recommended to use a lower linear energy density(within an appropriate range)in the selective laser melting process combined with the reverse airflow direction to suppress the spatter.

刘琦;安达;李晓丹;张广权;山玥;杨光

沈阳航空航天大学 机电工程学院,沈阳 110136||沈阳航空航天大学 辽宁省高性能金属增材制造工程研究中心,沈阳 110136沈阳航空航天大学 机电工程学院,沈阳 110136||沈阳航空航天大学 辽宁省高性能金属增材制造工程研究中心,沈阳 110136中航工业沈阳飞机工业(集团)有限公司 创新分公司,沈阳 110850沈阳航空航天大学 机电工程学院,沈阳 110136||沈阳航空航天大学 辽宁省高性能金属增材制造工程研究中心,沈阳 110136沈阳航空航天大学 机电工程学院,沈阳 110136||沈阳航空航天大学 辽宁省高性能金属增材制造工程研究中心,沈阳 110136沈阳航空航天大学 机电工程学院,沈阳 110136||沈阳航空航天大学 辽宁省高性能金属增材制造工程研究中心,沈阳 110136

机械制造

激光选区熔化飞溅熔池线性能量密度保护气流方向

selective laser meltingspattermolten poollinear energy densityshielding gas flow direction

《沈阳航空航天大学学报》 2026 (4)

28-34,7

国家自然科学基金(项目编号:52375359)沈阳市科学技术计划重大科技专项(项目编号:23-401-1-02).

10.3969/j.issn.2095-1248.2026.04.003

评论