首页|期刊导航|森林工程|不同密度木基碳材料的制备及电磁屏蔽性能

不同密度木基碳材料的制备及电磁屏蔽性能OA

Preparation and Study of Electromagnetic Shielding Properties of Wood-Based Carbon Materials with Different Densities

中文摘要英文摘要

为应对当前日益严峻的电磁污染问题,选取泡桐、椴木和桉木3种密度差异显著的常见阔叶材,通过高温碳化工艺制备木基碳材料,系统对比3种木基碳材料的理化性质与电磁屏蔽性能之间的关系.结果表明,经碳化处理后,木材仍保留天然的骨架结构与多孔特征;碳化过程使原本绝缘的木材获得导电性能,所得木基碳材料的电导率达到3.08~3.53 S/cm;3种木基碳材料的总屏蔽效能均达到20 dB以上,达到商业应用的基本要求.3种木材因微观结构与密度的差异,展现出不同的电磁屏蔽性能优势.其中密度最低的泡桐基碳以吸收损耗为主导,适用于绿色屏蔽应用;密度中等的椴木基碳则在吸收与反射之间取得平衡,表现出相对均衡的屏蔽性能;而密度最高的桉木基碳屏蔽效能最高,但反射损耗较强.研究结果揭示密度差异如何通过影响碳化后导电网络的连续性与孔隙结构,进而实现电导损耗与多重反射损耗的协同作用机制,为高性能木基碳电磁屏蔽复合材料的开发提供试验依据和理论参考.

To address the increasingly severe problem of electromagnetic pollution,three common broadleaf woods with significantly different densities-paulownia,basswood,and eucalyptus-were selected.Wood-based carbon materials were prepared using a high-temperature carbonization process,and the relationship between the physicochemical properties and electromagnetic shielding performance of these three materials was systematically compared.The results indicated that after carbonization,the wood retained its natural skeletal structure and porous characteristics;the carbonization process conferred electrical conductivity to the originally insulating wood,with the resulting wood-based carbon materials exhibit-ing a conductivity of 3.08-3.53 S·cm-1.The total shielding efficiency of all three wood-based carbon materials exceeded 20 dB,meeting the basic requirements for commercial applications.Due to differences in microstructure and density,the three wood types exhibited distinct advantages in electromagnetic shielding performance.Among them,the paulownia-based carbon,with the lowest density,was dominated by absorption loss and was suitable for green shielding applications;the basswood-based carbon,with medium density,struck a balance between absorption and reflection,demonstrating rela-tively balanced shielding performance;while the eucalyptus-based carbon,with the highest density,exhibited the highest shielding efficiency but had relatively strong reflection loss.This study reveals the mechanism by which density differ-ences influence the continuity and pore structure of the conductive network after carbonization,thereby achieving the synergistic interaction between conductive loss and multiple reflection loss.It provides experimental evidence and theo-retical references for the development of high-performance wood-based carbon electromagnetic shielding composites.

魏敏;于凡钧;邱哲;肖泽芳;张天鹏;谢延军

东北林业大学 材料科学与工程学院,哈尔滨 150040东北林业大学 材料科学与工程学院,哈尔滨 150040东北林业大学 材料科学与工程学院,哈尔滨 150040东北林业大学 材料科学与工程学院,哈尔滨 150040东北林业大学 材料科学与工程学院,哈尔滨 150040东北林业大学 材料科学与工程学院,哈尔滨 150040

农业科技

木基碳材料碳化电磁屏蔽密度多孔结构

Wood-based carbon materialscarbonizationelectromagnetic shieldingdensityporous structure

《森林工程》 2026 (5)

998-1010,13

国家重点研发计划项目(2023YFD2201402)黑龙江省博士后科研启动金项目(LBH-Z24004).

10.7525/j.issn.1006-8023.2026.05.011

评论