铅铋反应堆主泵入口结构对主泵性能的影响OA
Influence of Lead-Bismuth Reactor Main Pump Inlet Structure on Main Pump Performance
为研究铅冷快堆(LFR)主泵入口结构对核主泵内部流动与水力性能的影响,本文建立主泵入口结构水力模型.结合数值计算与理论分析,采用 SST k-ω 湍流模型,借助 ANSYS CFX 软件对带入口结构的铅铋主泵开展瞬态数值模拟,并与无入口结构的主泵进行流场及性能对比,探究入口结构对泵内流动规律与水力性能的作用规律.结果表明:主泵增设入口结构后,轴功率增大,扬程提升 4.5%,叶轮主流区扬程同步上升;该结构会造成主泵入口流场分布不均,叶轮入口处产生多组涡旋与二次流,进而改变叶轮入口液流角;流场不均匀最终导致主泵水力效率降低.因此,核主泵工程应用需重点开展泵体与入口结构的耦合设计,在保证水力性能的前提下,削弱入口结构对叶轮入口流场的干扰.
A hydraulic model of the main pump inlet structure was built to study the influence of the main pump inlet structure of lead-cooled fast reactors(LFRs)on the internal flow and hydraulic perform-ance of the nuclear main pump.Based on numerical calculations and theoretical analysis,the SST k-ω tur-bulence model was adopted,and ANSYS CFX was employed to conduct transient numerical simulations of the lead-bismuth main pump with an inlet structure,and flow field and performance comparisons were made with the main pump without an inlet structure.The influence of the inlet structure on the internal flow patterns and hydraulic performance of the main pump was investigated.The results show that after adding the inlet structure to the main pump,the shaft power increases,the head increases by 4.5%,and the im-peller head in the mainstream area rises.This structure causes non-uniform flow field distribution at the pump inlet,and multiple pairs of vortices and secondary flows are generated at the impeller inlet,thus chan-ging the liquid flow angle at the impeller inlet.The non-uniform flow field ultimately reduces the hydraulic efficiency of the main pump.Therefore,the key point for the engineering application of the nuclear main pump should be the coupling design of the main pump and the inlet structure to both weaken the influence of the inlet structure on the impeller inlet flow field and ensure the hydraulic performance.
杨从新;段鑫森;王岩;谭鑫;郭艳磊;吕天智
兰州理工大学能源与动力工程学院,甘肃 兰州 730050兰州理工大学能源与动力工程学院,甘肃 兰州 730050中国核动力研究设计院核反应堆系统设计技术重点实验室,四川 成都 610213||四川大学电子信息学院,四川 成都 610065中国核动力研究设计院核反应堆系统设计技术重点实验室,四川 成都 610213兰州理工大学能源与动力工程学院,甘肃 兰州 730050兰州理工大学能源与动力工程学院,甘肃 兰州 730050
能源科技
铅冷快堆核主泵入口结构非均匀入流数值模拟试验验证
lead-cooled fast reactorsnuclear main pumpinlet structurenon-uniform inflownumerical simulationexperimental validation
《西华大学学报(自然科学版)》 2026 (5)
58-67,10
国家自然科学基金项目(12062012).
评论