首页|期刊导航|西华大学学报(自然科学版)|弱激励涡流热成像曲面检测磁芯激励器设计

弱激励涡流热成像曲面检测磁芯激励器设计OA

Design of Magnetic Core Inductors for Weak-Excitation Eddy Current Thermography in Curved Surface Detection

中文摘要英文摘要

涡流热成像检测研究中激励器多采用高频、强电流激励方式检测材料表面/亚表面缺陷,检测对象多为平面形状,且激励器静态加热区域面积较小.石油化工领域中的管道、储罐等设备多为曲面结构,且处于防爆要求严格的环境中,对激励电流具有严格限制,导致涡流热成像技术在此类场景下的检测效率与适用性受到显著制约.针对上述问题,文章通过数值模拟方法,对适用于弱激励条件下的大尺寸曲面磁芯激励器进行结构设计,以解决强电流依赖和激励器与曲面检测适配问题.通过对比平面磁芯激励器加热效果表明,采用曲面磁芯结构可在小曲率半径下保持激励器的加热能力与加热均匀性,并避免机械干涉.在该设计结构参数下得到不同曲率半径范围内的优选加热方案:曲率半径小于 1 m 时采用曲面磁芯激励器;1 m 至 7 m 之间采用平面磁芯平行布置方式;大于7 m时则采用平面磁芯垂直布置方式.该方案在激励电流 15 A、频率 50 Hz 的弱激励条件下,可实现曲面的相对均匀加热,提升了检测安全性,为涡流热成像检测在石油化工等高风险环境中的应用提供参考.

In eddy current thermography testing research,inductors predominantly employ high-fre-quency and high-current excitation methods to detect surface and subsurface defects in materials.The detec-tion objects are mostly flat,and the static heating area of the inductors is relatively small.However,equip-ment such as pipelines and storage tanks in the petrochemical industry mostly features curved surface struc-tures and operates in environments with stringent explosion-proof requirements,thus imposing strict limita-tions on excitation currents.Consequently,the detection efficiency and applicability of eddy current ther-mography technology are significantly limited under such scenarios.To this end,numerical simulation methods were adopted to carry out the structural design of a large-sized curved magnetic core inductor ap-plicable to weak-excitation conditions,and resolve the dependency on high currents and the compatibility between inductors and curved surface detection.A comparison of the heating performance of planar mag-netic core inductors demonstrates that the curved magnetic core structure maintains heating capacity and uniformity under a small curvature radius while avoiding mechanical interference.Based on the designed structural parameters,optimal heating solutions for different curvature radius ranges were obtained.A curved magnetic core inductor is suitable for curvature radii less than 1 m,a parallel arrangement of planar magnetic cores is applicable to radii between 1 m and 7 m,and a perpendicular arrangement of planar mag-netic cores is suitable for radii greater than 7 m.In weak-excitation conditions with the excitation current of 15 A and frequency of 50 Hz,relatively uniform heating is achieved on curved surfaces,which enhances detection safety.This study provides a reference for the application of eddy current thermography testing in high-risk environments such as petrochemical facilities.

肖相陶;夏杰;唐松;孔春岩;李双双;张梁

西华大学机械工程学院,四川 成都 610039西华大学机械工程学院,四川 成都 610039西华大学机械工程学院,四川 成都 610039西华大学机械工程学院,四川 成都 610039西华大学机械工程学院,四川 成都 610039西南石油大学机电工程学院,四川 成都 610500

信息技术与安全科学

涡流热成像弱激励曲面检测磁芯激励器均匀加热

eddy current thermographyweak-excitationcurved surface detectionmagnetic core inductoruniform heating

《西华大学学报(自然科学版)》 2026 (5)

17-28,12

西华大学科研基金项目(Z231024)石油天然气装备教育部重点实验室基金项目(OGE202303-18).

10.12198/j.issn.1673-159X.5914

评论