首页|期刊导航|热力透平|燃气轮机电厂部分负荷性能优化研究

燃气轮机电厂部分负荷性能优化研究OA

Research on Performance Optimization of Gas Turbine Power Plants Under Part-Load Conditions

中文摘要英文摘要

针对燃气轮机电厂部分负荷运行时的性能优化,选取某F级燃气轮机三压再热式燃气-蒸汽联合循环系统作为研究对象,采用热力计算软件IPSEpro开展了模拟计算,深入分析了修正后透平排烟温度(TETC)和主蒸汽、热再蒸汽温度对联合循环电厂部分负荷运行效率的影响.研究发现,在不同环境温度、负荷率、蒸汽温度限值下,TETC对联合循环性能的影响存在差异.在部分负荷工况下,通过合理调整TETC和蒸汽温度参数,可有效提升联合循环系统的热效率.研究成果可为同类电厂的部分负荷性能优化提供参考.

To address the performance optimization of gas turbine power plants during part-load operation,this study investigates an F-class gas turbine triple-pressure reheat gas-steam combined cycle system.Simulations were conducted using the thermal calculation software IPSEpro to comprehensively analyze the effects of the corrected turbine exhaust temperature(TETC)and the temperatures of the main steam,as well as hot reheat steam on the part-load efficiency of the combined cycle plant.The results indicate that the impact of TETC on the combined cycle performance varies under different ambient temperatures,load ratios,and steam temperature limits.Under part-load conditions,the thermal efficiency of the combined cycle system can be effectively improved through rational adjustment of TETC and steam temperature parameters.The findings of this study can provide reference for part-load performance optimization in similar power plants.

张传辉;黄超群

上海电气燃气轮机有限公司,上海 200240上海电气燃气轮机有限公司,上海 200240

能源科技

燃气轮机部分负荷工况性能优化排烟温度主蒸汽温度热再蒸汽温度

gas turbinepart-load conditionperformance optimizationexhaust temperaturemain steam temperaturehot reheat steam temperature

《热力透平》 2026 (3)

180-183,197,5

10.13707/j.cnki.31-1922/th.2026.03.002

评论