半固态注射成形工艺参数对AZ91D流动性及力学性能的影响OA
Effect of semi-solid injection molding process parameters on the flowability and mechanical properties of AZ91D
镁合金半固态注射成形技术在各领域的应用迅速发展,半固态浆料的充型性对铸件的力学性能至关重要.通过系统研究成形温度、注射压力、模具温度和保压时间对AZ91D半固态浆料充型距离的影响规律,掌握半固态浆料的流动性规律及充型距离对力学性能的影响.试验结果表明:成形温度在595~600℃,模具温度在230~250℃,注射速度在2.0~2.3m/s,保压时间为1.0s时的铸件充型质量最佳,而距离注射口距离过近或过远对力学性能均不利.
Semi-solid injection molding technology for magnesium alloys has developed rapidly in various fields,and the filling ability of semi-solid slurry plays a crucial role in the mechanical properties of castings.In this study,the effects of forming temperature,injection pressure,mold temperature,and holding time on the filling distance of AZ91D semi-solid slurry were systematically investigated in order to clarify the flow behavior of the semi-solid slurry and the influence of filling distance on mechanical properties.The experimental results show that the optimal filling quality is achieved at a forming temperature of 595~600 ℃,a mold temperature of 230~250 ℃,an injection velocity of 2.0~2.3m/s,and a holding time of 1.0s.The results also indicate that both excessively short and excessively long distances from the injection gate are detrimental to the mechanical properties.
周俊;鹿宪珂;李祥;郭春榕;邓祖作;王建存;郝伟娜
浙江工业大学机械工程学院 浙江 杭州 310023||伊之密股份有限公司,广东省智能化模压成形装备企业重点实验室 广东佛山 528306伊之密股份有限公司,广东省智能化模压成形装备企业重点实验室 广东佛山 528306||宁波工程学院机械与汽车工程学院 浙江宁波 315211伊之密股份有限公司,广东省智能化模压成形装备企业重点实验室 广东佛山 528306伊之密股份有限公司,广东省智能化模压成形装备企业重点实验室 广东佛山 528306伊之密股份有限公司,广东省智能化模压成形装备企业重点实验室 广东佛山 528306伊之密股份有限公司,广东省智能化模压成形装备企业重点实验室 广东佛山 528306浙江工业大学机械工程学院 浙江 杭州 310023
半固态注射成形AZ91D镁基复合材料流动性力学性能
semi-solid injection moldingAZ91Dmagnesium compositesflowabilitymechanical properties
《金属加工(热加工)》 2026 (9)
164-172,9
宁波市自然科学基金青年博士创新研究项目(2024J432).
评论