基于Arrhenius模型的Q195钢热轧过程轧制力预测OA
Hot-rolling force prediction for Q195 steel based on Arrhenius model
Q195钢在热轧薄板生产中易因轧制力分布不均导致边浪等板形缺陷,因此精确预测轧制力对工艺优化至关重要.通过Gleeble-3800热模拟试验机获取了不同温度与应变速率下的应力-应变数据,构建了双曲正弦Arrhenius本构模型,并创新性地引入BP神经网络进行应力补偿,使流变应力预测的决定系数达到0.99967.基于此,开发了适用于ABAQUS的VUMAT用户材料子程序,并采用工厂实际工艺参数建立了单道次热轧有限元模型.模拟结果与工厂实测数据对比显示,轧制力预测平均误差仅为1.239%,精度显著优于原始Arrhenius模型与Johnson-Cook模型,充分验证了所提建模方法在实际工程中的准确性与可靠性.
In the production of hot-rolled thin plates,Q195 steel is prone to shape defects like edge waves due to uneven distribution of rolling forces,making precise prediction of rolling forces crucial for process optimization.This paper obtained stress-strain data at various temperatures and strain rates using the Gleeble-3800 thermal simulator,constructing a hyperbolic sine Arrhenius constitutive model.Innovatively,a BP neural network was introduced for stress compensation,achieving a determination coefficient of 0.99967 in flow stress prediction.Based on this,a VUMAT user-defined material subroutine suitable for ABAQUS was developed,and a single-pass hot rolling finite element model was established using actual factory process parameters.Comparison of simulation results with factory-measured data revealed that the predicted average rolling force error is only 1.239%,demonstrating significantly higher accuracy than the original Arrhenius model and the Johnson-Cook model.This fully validates the accuracy and reliability of the proposed modeling approach in practical engineering applications.
时赛楠;李京阳;白韶斌;张红旭;夏云峰;邢彤
中北大学航空宇航学院 山西太原 030051中北大学航空宇航学院 山西太原 030051中北大学航空宇航学院 山西太原 030051山西建邦集团有限公司 山西临汾 043000山西建邦集团有限公司 山西临汾 043000山西工程技术学院 山西阳泉 045000
Q195钢Arrhenius本构模型有限元模型轧制力预测BP神经网络
Q195 steelArrhenius constitutive modelfinite element modelrolling force predictionBP neural network
《金属加工(热加工)》 2026 (9)
21-29,9
国家自然科学基金项目(52205402)山西省基础研究计划青年项目(202203021212318).
评论