蓝宝石晶片高效磁辅助抛光工艺参数研究OA
Research on process parameters of high-efficiency magnetically assisted polishing of sapphire wafers
为探究蓝宝石晶片的磁辅助抛光机理及抛光工艺参数,利用自主搭建的立式磁辅助抛光机床,基于磁场对磁性磨粒调控形成的特定黏弹性磁性簇,实现蓝宝石晶片的高效率抛光;并结合有限元仿真和实验验证,分析永磁铁排列方式及数量、工件与抛光盘转速比等工艺参数对晶片材料去除率和表面粗糙度的影响.结果表明:磁化压力与永磁铁数量及其排列方式密切相关,磨粒的轨迹分布及长度主要受转速比影响;当永磁铁数量增多时,磁化压力呈逐渐增大的趋势,且NS交替排列时的磁化压力明显高于NS同极排列;不同转速比可显著改变磨粒轨迹长度,进而影响蓝宝石晶片的材料去除率;当永磁铁数量为18个且采用NS交替排列方式、工件与抛光盘转速比为-50∶400时,蓝宝石晶片的抛光效率和表面质量明显提高,材料去除率为223.8 nm/min,表面粗糙度最低为5 nm.
Objectives:Sapphire crystals have been widely used in the fields of semiconductors,optoelectronics,aerospace and other areas due to their excellent hardness,chemical stability and optical properties.However,the high hardness and brittleness of sapphire present many challenges for traditional polishing processes,such as low material removal rates,high surface roughness,and low processing efficiency.These issues restrict the further promotion of sapphire in high-precision applications.To address these technological bottlenecks,this study focuses on the efficient magnetic-assisted polishing technology of sapphire chips,aiming to significantly improve polishing efficiency and surface quality by optimizing process parameters.The main objective of this study is to explore the potential application of magnetic-assisted polishing technology in sapphire wafer processing.By optimizing process parameters such as magnetic pole arrangement,number of magnets,and rotation speed ratio,material removal rate can be improved,at the same time,reducing surface roughness.Methods:Research is based on a self-built vertical magnetic assisted polishing machine tool,which controls the magnetic particles through a magnetic field to form magnetic clusters with specific viscoelastic properties,thereby achieving efficient polishing of sapphire components.In the experiment,magnetic particles form ordered clusters under the influence of a magnetic field.These clusters act as tiny grinding tools during polishing process,effectively removing materials from the surface of sapphire.Combining finite element simulation and experimental verification,the effects of magnet pole arrangement,number of magnets,and speed ratio on polishing effect have been systematicly anelyzed.The simulation model accurately simulates the interaction between magnetic fields and magnetic particles,revealing the correlation between magnetization pressure and the number,the arrangements of magnets,as well as the relationship between abrasive grain trajectory distribution and length with respect to speed ratios.Results:The simulation results show that with the increase in the number of magnets,magnetic pressure initially remains constant and then significantly increases.When the magnets are arranged alternately with NS,the magnetization pressure is significantly higher than when they are aligned in the same pole direction.This indicates that alternating arrangement of magnetic poles can more effectively enhance magnetic field effects and thus improve polishing efficiency.In addition,different speed ratios can significantly change the abrasive particle trajectory lengths,thereby affecting material removal rates.The experimental results confirm the simulation conclusion:when there are 18 magnets arranged alternately in NS direction and the speed ratio is-50:400,the material removal rate reaches 223.8 nm/min,with a minimum surface roughness of 5 nm.This result indicates that the optimized process parameters can significantly improve the polishing efficiency and surface quality of sapphire wafers,while maintaining good processing stability.Conclusions:This study achieved efficient polishing of sapphire chips by optimizing the magnet arrangement(18 circumferential distribution,NS alternate arrangement)and speed ratio(-50:400).The optimized process not only significantly improves the material removal rate,but also greatly reduces surface roughness.
叶卉;王健;时政钰;刘忠祥;王泽华;姜晨
上海理工大学 机械工程学院,上海 200093上海理工大学 机械工程学院,上海 200093上海理工大学 机械工程学院,上海 200093上海理工大学 机械工程学院,上海 200093上海理工大学 机械工程学院,上海 200093上海理工大学 机械工程学院,上海 200093
矿业与冶金
磁辅助抛光磁化压力磨粒轨迹长度材料去除率表面粗糙度
magnetic-assisted polishingmagnetizing pressurelength of abrasive tracksmaterial removal ratesurface roughness
《金刚石与磨料磨具工程》 2026 (4)
556-568,13
国家自然科学基金(62305211).
评论